OKI CX4545

Serg
Posts: 49
Joined: Sat Oct 21, 2017 9:51 pm

OKI CX4545

Postby Serg » Sat Nov 06, 2021 11:21 pm

OKI CX3535, CX4545, ES9460, ES9470
Self Diagnostic Mode
Starting each mode
To enter the desired mode, turn the power ON while pressing two digital keys designated to each mode (e.g. [0] and [5]) simultaneously. Hold the two keys until the [COPY] [e-FILING] [SCAN] [PRINT] [FAX] buttons are lit.
On the authentication screen displayed after starting up each mode, enter the service password, and
then press [OK]. The password is not set by default.
Exiting from each mode
Shut down the equipment. When the power should be turned OFF, be sure to shut down the equipment
by pressing the [ON/OFF] button for a few seconds.
Serg
Posts: 49
Joined: Sat Oct 21, 2017 9:51 pm

Re: OKI CX4545

Postby Serg » Sat Nov 06, 2021 11:28 pm

OKI CX3535, CX4545, ES9460, ES9470
Self Diagnostic Mode
List of modes
  • Control panel check mode
    [0] + [1] + [POWER]
    All LEDs on the control panel are lit, and all the LCD pixels blink.
  • Test mode
    [0] + [3] + [POWER]
    Checks the status of input/output signals.
  • Test print mode
    [0] + [4] + [POWER]
    Outputs the test patterns.
  • Adjustment mode
    [0] + [5] + [POWER]
    Adjusts various items.
  • Setting mode
    [0] + [8] + [POWER]
    Sets various items.
  • Assist mode
    [3]+[C]+ [POWER]
    Clears error flags or SRAM, or safely deletes data in the HDD or SRAM to support the replacement of the SYS board, SRAM or HDD.
  • HDD assist mode
    [4]+[CLEAR]+ [POWER]
    Assists the ADI-HDD by checking the type of the mounted HDD, reverting the HDD to a factory default or removing keys.
  • File system recovery mode
    [5] + [C] + [POWER]
    Checks, recovers or initializes the file system (HDD).
  • SRAM clear mode
    [6]+[CLEAR]+ [POWER]
    Recovers the equipment from particular errors such as F800 or F900.
  • List print mode
    [9] + [START] + [POWER]
    Prints various lists or outputs them in a CSV format.
  • PM support mode
    [6] + [START] + [POWER]
    Clears each counter.
  • Firmware update mode
    [4] + [9] + [POWER]
    Performs firmware update with USB media.
    8] + [9] + [POWER]
    Performs firmware update with download jig.
  • Password reset mode
    [4] + [8] + [9] + [POWER]
    Resets the administrator password and service password.

Return to “OKI”

Who is online

Users browsing this forum: No registered users and 1 guest