Page 1 of 1

Kyocera KM3035 error c3200

Posted: Mon Oct 23, 2017 12:01 pm
by obaid
hi sir i need a help my kyocera km-3035 having error c3200 now i actutally said how to solve this problem

Re: Kyocera KM3035 error c3200

Posted: Mon Oct 23, 2017 12:28 pm
by Serviceman
Error code C3200.
Exposure lamp problem
• Non-lighting of the exposure lamp is detected at the beginning of copying.
Cause: Poor contact of the connector terminals.
Solution: Check the connection of connector YC34 on the main PCB, and the continuity across the connector terminals. Repair or replace if necessary.
Cause: Defective main PCB.
Solution: Replace the main PCB and check for correct operation.
Cause: Defective exposure lamp.
Solution: Replace the exposure lamp or inverter PCB and check for correct operation.

Re: Kyocera KM3035 error c3200

Posted: Mon Jul 09, 2018 12:37 pm
by kaborwen
Hi,
Clean Mirrors and exposure glace.

Hope it's helpfull!

Kyocera KM3035 error c3200

Posted: Sat Feb 23, 2019 6:24 pm
by TimothywaB
I my 3 months old Kyocera taskalfa 3011i 55K copies giving error C6250. I am unable to resolve the error. Sometime it gives error after 4-5 copies and sometime after 4-5 Hrs. so cant find the root cause and solution. I have already cleaned the middle thermistor on fuser unit but unable to clean the edge thermistor. Please help. Machine is only 3 months old.

View first unread post

Posted: Thu Mar 21, 2019 1:27 pm
by Henryemiva
Where am i looking for it? We cant see a View first unread post. Got it. Its very good. What was there before? A&M

Kyocera KM3035 error c3200

Posted: Sat Aug 22, 2020 5:55 pm
by DavidAmoks
Hi can u please help me how and where to fix kyocera 1020 mfp error code 0017 bk pc motor bad timing. I searched that some pan m 11 j r needed to chenge but where. I dont know. Please tell me how n where to fix it