Kyocera KM3035 error c3200

Posts: 1
Joined: Mon Oct 23, 2017 11:52 am

Kyocera KM3035 error c3200

Postby obaid » Mon Oct 23, 2017 12:01 pm

hi sir i need a help my kyocera km-3035 having error c3200 now i actutally said how to solve this problem
User avatar
Posts: 83
Joined: Sat Oct 21, 2017 9:37 pm

Re: Kyocera KM3035 error c3200

Postby Serviceman » Mon Oct 23, 2017 12:28 pm

Error code C3200.
Exposure lamp problem
• Non-lighting of the exposure lamp is detected at the beginning of copying.
Cause: Poor contact of the connector terminals.
Solution: Check the connection of connector YC34 on the main PCB, and the continuity across the connector terminals. Repair or replace if necessary.
Cause: Defective main PCB.
Solution: Replace the main PCB and check for correct operation.
Cause: Defective exposure lamp.
Solution: Replace the exposure lamp or inverter PCB and check for correct operation.
Posts: 1
Joined: Mon Jul 09, 2018 12:23 pm

Re: Kyocera KM3035 error c3200

Postby kaborwen » Mon Jul 09, 2018 12:37 pm

Clean Mirrors and exposure glace.

Hope it's helpfull!
Posts: 7
Joined: Fri Jan 25, 2019 7:39 am
Location: Denmark

Kyocera KM3035 error c3200

Postby TimothywaB » Sat Feb 23, 2019 6:24 pm

I my 3 months old Kyocera taskalfa 3011i 55K copies giving error C6250. I am unable to resolve the error. Sometime it gives error after 4-5 copies and sometime after 4-5 Hrs. so cant find the root cause and solution. I have already cleaned the middle thermistor on fuser unit but unable to clean the edge thermistor. Please help. Machine is only 3 months old.
Posts: 10
Joined: Sun Feb 03, 2019 12:50 am
Location: Sri Lanka

View first unread post

Postby Henryemiva » Thu Mar 21, 2019 1:27 pm

Where am i looking for it? We cant see a View first unread post. Got it. Its very good. What was there before? A&M
Posts: 2
Joined: Fri Aug 14, 2020 7:21 am

Kyocera KM3035 error c3200

Postby DavidAmoks » Sat Aug 22, 2020 5:55 pm

Hi can u please help me how and where to fix kyocera 1020 mfp error code 0017 bk pc motor bad timing. I searched that some pan m 11 j r needed to chenge but where. I dont know. Please tell me how n where to fix it

Return to “Kyocera KM”

Who is online

Users browsing this forum: No registered users and 1 guest