Search found 28 matches

by Malik
Fri Mar 19, 2021 8:50 am
Forum: Ricoh DD, DX
Topic: Ricoh DD4450
Replies: 0
Views: 82

Ricoh DD4450

My Ricoh DD4450 has a problem and doesn't know how to fix it.
I was printing and the ink ran out I insert a new tube of ink but it says out of ink, insert the ink cartridge.
by Malik
Tue Mar 16, 2021 9:00 am
Forum: imagePROGRAF, iPF
Topic: Canon iPF Pro 4000
Replies: 0
Views: 95

Canon iPF Pro 4000

Bonjour j'ai besoin d'aide sur Canon pro 4000. Erreur EC34-4201
by Malik
Wed Mar 10, 2021 9:43 am
Forum: HP LaserJet
Topic: HP LaserJet M1136 MFP
Replies: 1
Views: 99

Re: HP LaserJet M1136 MFP

The product does not pull paper from the input tray. ⋅ The product might be in manual-feed mode. At the computer, follow the on-screen instructions to deactivate manual-feed mode. Or, at the product, open and close the print-cartridge door. ⋅ The pickup roller might be dirty or ...
by Malik
Wed Mar 03, 2021 5:53 pm
Forum: Epson SureColor
Topic: Epson SureColor T3070
Replies: 1
Views: 86

Re: Epson SureColor T3070

Code: 150C PG position undetectable error When changing the PG, the PG SENSOR could not detect the PG position. Solution: ⋅ Replace the PG SENSOR. ⋅ Replace the APG UNIT. ⋅ Remove any obstacles around the CR UNIT home position. The printer changes the PG with the CR UN...
by Malik
Wed Mar 03, 2021 12:52 pm
Forum: Samsung Xpress
Topic: Samsung Xpress M2070
Replies: 1
Views: 135

Re: Samsung Xpress M2070

Error Codes: U1–2320, U1–2330, U1–2340 Error Message: ⋅ Error #U1-2320 Turn off then on ⋅ Error #U1-2330 Turn off then on ⋅ Error #U1-2340 Turn off then on Description: The temperature control of fuser unit is abnormal. ⋅ U1–2320 : Open Heat Error ⋅ ...
by Malik
Tue Mar 02, 2021 10:28 am
Forum: Toshiba e-Studio
Topic: Toshiba e-Studio 2540c
Replies: 1
Views: 61

Re: Toshiba e-Studio 2540c

Code CE20 Image quality sensor abnormality Image control related service call Image quality sensor abnormality (no pattern level): The output value of this sensor is out of a specified range when the image quality control test pattern is not formed. 1 ⋅ Is the transfer belt or the transfe...
by Malik
Sat Feb 27, 2021 2:57 pm
Forum: Kyocera KM
Topic: Kyocera KM3050
Replies: 1
Views: 79

Re: Kyocera KM3050

Code: C7300 Toner container problem Toner level is not detected when toner empty is detected. Cause: ⋅ Poor contact in the connector terminals. ⋅ Defective toner container sensor Solution: ⋅ Poor contact in the connector terminals. Check the connection of connector YC9...
by Malik
Wed Feb 24, 2021 8:15 pm
Forum: Ricoh MP, MPC
Topic: Ricoh MP C305SPF
Replies: 1
Views: 146

Re: Ricoh MP C305SPF

Code 361-0x - TD sensor (Vt) upper limit error 1 Code: 361-01 TD sensor (Vt) upper limit error: Bk The Vt value upper limit of the black TD sensor (SP3210-001) exceeds the specified value (SP3211-002) for the specified number of times (SP3211-003) consecutively. Code: 361-02 TD sensor (Vt) upper li...
by Malik
Sun Feb 21, 2021 11:34 pm
Forum: imageRUNNER, iR
Topic: Canon iR7105
Replies: 1
Views: 113

Re: Canon iR7105

Code: E110-0000 The laser scanner motor rotation has a fault. After the laser scanner motor has gone on, the PLL lock signal of the motor is not detected for 15 sec or more. Solution: ⋅ Check to see if all covers have been attached to the primary charging assembly. ⋅ Disconnect ...
by Malik
Sun Feb 21, 2021 2:19 pm
Forum: Ricoh SP, SPC
Topic: Ricoh SP3600
Replies: 1
Views: 94

Re: Ricoh SP3600

Code: SC542-01 Fusing lamp (Center) thermistor not reloaded 1 Cause: The heater thermistor has increased by less than 2.0 degrees in 1.5 seconds 5 times in a row. ⋅ Deformed or floating thermistor ⋅ Input voltage out of range Solution: ⋅ Clear the SP: fusing SC. ⋅...

Go to advanced search