Xerox WorkCentre C226

38 Main Program 66

• Diagnostic No. 66-01 Used to change/set the soft SW setting (FAX-related items). (When the FAX is installed.) FAX Diagnostic No. 66-02 Used to initialize the soft SW setting (FAX-related items) according to the destination. (When the FAX is installed.) FAX
• Diagnostic No. 66-03 Used to check the memory on the Modem controller. (When the FAX is installed.) FAX
• Diagnostic No. 66-04 Used to select a signal and send it to the line and speaker (at the max. level). (When the FAX is installed.) FAX
• Diagnostic No. 66-05 Used to select a signal and send it to the line and the speaker. (Level: Soft SW setting) (When the FAX is installed.) FAX
• Diagnostic No. 66-06 Used to print the check list of the contents when confidential registration is made. (When the FAX is installed.) FAX
• Diagnostic No. 66-07 Used to print all the images in the memory. (When the FAX is installed.) FAX
• Diagnostic No. 66-10 All the images in the memory can be deleted, (When the FAX is installed.) FAX
• Diagnostic No. 66-11 Used to select a pattern and send it to the line and the speaker at 300bps (at the max. level). (When the FAX is installed.) FAX
• Diagnostic No. 66-12 Used to select a pattern and send it to the line and the speaker at 300bps. (Level: soft SW setting) (When the FAX is installed.) FAX
• Diagnostic No. 66-13 Used to register a dial number for test used in Diagnostic No. 66- 14/Diagnostic No. 66-15/Diagnostic No. 66-16. (When the FAX is installed.) FAX
• Diagnostic No. 66-14 Used to adjust and check the make time of dial pulse (10pps). (When the FAX is installed.) FAX
• Diagnostic No. 66-15 Used to adjust and check the make time of the dial pulse (20pps). (When the FAX is installed.) FAX
• Diagnostic No. 66-16 Used to adjust and check the send level of DTFM signal. (When the FAX is installed.) FAX
• Diagnostic No. 66-17 Used to select the DTFM signal (1 - 9, 0, '. #) to send it to the line and the speaker (at the max. level). (When the FAX is installed.) FAX
• Diagnostic No. 66-18 Used to select the DTFM signal (1 - 9, 0. ', #) to send it to the line and the speaker (Level: soft SW setting). (When the FAX is installed.) FAX
• Diagnostic No. 66-19 Used to write the ICU PWB SRAM contents (various set values and user data) into the Flash ROM (AR-MM9). (When the FAX is installed.) FAX
• Diagnostic No. 66-20 Used to write the Flash ROM (AR-MM9) contents (SRAM contents written with Diagnostic No. 66-19) into the ICU PWB SRAM. (When the FAX is installed.) FAX
• Diagnostic No. 66-21 Used to print various registration information, communication, file management, system error, and protocol information. (When the FAX is installed.) FAX
• Diagnostic No. 66-22 Used to set the sound volume of the handset. (When the FAX is installed.) FAX
• Diagnostic No. 66-23 Used to download the FAX program. (When the FAX is installed.) FAX
• Diagnostic No. 66-24 Used to clear the data in the FAST memory. (When the FAX is installed.) FAX
• Diagnostic No. 66-29 Used to clear the data related to the address book (one-touch registration, program registration/ expansion, interface memory box registration, each table contents). (When the FAX is installed.) FAX
• Diagnostic No. 66-30 Used to check the status change of the TEL/LIU is installed.) FAX
• Diagnostic No. 66-31 Used to set ON/OFF of each port for output to the TEL/LIU. (When the FAX is installed.) FAX
• Diagnostic No. 66-32 Used to check (compare) the received data (fixed data) from the line to make judgment of error or normal, (When the FAX is installed.) FAX
• Diagnostic No. 66-33 Used to detect signals (BUSY TONE/ CNG/CED/FNET) from the line. (When the FAX is installed.) FAX
• Diagnostic No. 66-34 Used to display the time required for sending the test image data. (When the FAX is installed.) FAX
• Diagnostic No. 66-35 Used to rewrite the Modem program. (When the FAX is installed.) FAX
• Diagnostic No. 66-36 Used to check send/receive (data/command line) from the Modem controller to the MFP controller. (When the FAX is installed) FAX
• Diagnostic No. 66-39 Used to set the destination of the FAX. (When the FAX is installed.) FAX
• Diagnostic No. 66-42 PIC program rewriting (When the FAX is installed.) FA
• Diagnostic No. 66-43 PIC adjustment value writing (When the FAX is installed.) FAX

39 Main Program 67

• Diagnostic No. 67-01 Used to check the operations of printer DRAM read/write. Printer
• Diagnostic No. 67-11 Used to set the printer parallel I/F SELECT IN signal. Printer
• Diagnostic No. 67-14 Used to perform upgrade of the firmware. (Printer) Firmware (Printer)
• Diagnostic No. 67-17 Used to clear NVRAM. (Printer) Printer
• Diagnostic No. 67-18 Used to clear the Flash data. (Printer) Printer
• Diagnostic No. 67-24 Used to adjust half-tone density of the printer engine automatically.
• Diagnostic No. 67-25 Printer engine color balance manual correction: PG print (Used to perform a fine adjustment of color from the adjustment of Diagnostic No. 67-24).
• Diagnostic No. 67-26 Used to select the target value of the referenced scanner in the printer engine automatic density adjustment. (The target value set with Diagnostic No. 67-24 and the gray balance can be adjusted.)
• Diagnostic No. 67-27 Used to display and register the scanner target value (for servicing) of the printer engine automatic density adjustment. (Conforms to the service button of Diagnostic No. 67-24. (The serviceman can scan the target value.)
• Diagnostic No. 67-28 Used to reset the scanner target value (for servicing) in the printer engine automatic density adjustment to the standard value. (Reset to the standard value of Diagnostic No. 67-27. (The value is reset to the factory setting.)
• Diagnostic No. 67-29 Used to set the printer screen mode.
• Diagnostic No. 67-40 Used to copy the scanner destination. (Flash writing)