Xerox WorkCentre C226

31 Main Program 52

• Diagnostic No. 52-01 Used to adjust the duplex print mode stacking capacity (Used to adjust the stop position of the duplex unit paper tray width alignment plate. The home position of the width alignment plate is changed by software.) Duplex

32 Main Program 53

• Diagnostic No. 53-08 Used to adjust the document feeder unit document scanning position. Automatic Document Feeder

33 Main Program 60

• Diagnostic No. 60-01 Used to check the operation of ICU PWB image DRAM read/ write. ICU Memory

34 Main Program 61

• Diagnostic No. 61-04 Used to adjust the scanner (writing) unit (LED array unit) skew. Scanner (writing)

35 Main Program 63

• Diagnostic No. 63-01 Used to check the result of shading correction. (The shading correction Operation data output, data are displayed.) Scanner (exposure)
• Diagnostic No. 63-03 Used to adjust the CCD color balance (gamma). Scanner (reading)
• Diagnostic No. 63-05 Used to set the CCD color balance (gamma) default. Scanner (reading)
• Diagnostic No. 63-06 Used to check the color balance (gamma) check patch. Image process (MFP)
• Diagnostic No. 63-07 Used to set the target color balance (gamma) for auto color balance adjustment. The standard color balance (gamma) or an optional color balance (gamma) is set as the service target. Image process (MFP)
• Diagnostic No. 63-08 Used to set the service target of the automatic color balance adjustment (Diagnostic No. 46-24) and the automatic color balance adjustment target of the key operator program to the same balance as the factory target of the automatic color balance adjustment (Diagnostic No. 46-24). Scanner (reading)
• Diagnostic No. 63-09 Used to adjust the CCD gamma (CCD calibration) (copy document mode). Scanner (reading)
• Diagnostic No. 63-10 Used to set the copy document mode color balance (gamma) default. Scanner (image scanning) Diagnostic No. 63-11 Used to set the factory color balance in the automatic color balance adjustment (Diagnostic No. 46-24). Scanner (reading)

36 Main Program 64

• Diagnostic No. 64-01 Used to adjust the operations of the printer section (self-print operation/ color). (The print pattern, paper feed mode, print mode, print quantity, and density can be changed optionally.) Printer
• Diagnostic No. 64-02 Used to print the color patch image (adjustment pattern). The above color patch image (adjustment pattern) is outputted according to the currently adjusted color balance (gamma). Use Diagnostic No. 63-07 to read the color patch image (adjustment pattern), which can be used as the service target of the automatic color balance (gamma) adjustment. Printer
• Diagnostic No. 64-03 Used to check the operations of the printer section (self-print operation/ BW). (The print pattern, the paper feed mode, the print mode, the print quantity, and the density can be set optionally.) Printer

37 Main Program 65

• Diagnostic No. 65-01 Used to adjust the touch panel (LCD display section) detection position. Operations Display
• Diagnostic No. 65-02 Used to check the result of the touch panel (LCD display) detection position adjustment. (The coordinates are displayed.) Printer