Xerox WorkCentre C226

24 Main Program 43

• Diagnostic No. 43-01 Used to set the fusing temperature in each operation mode. Fusing
• Diagnostic No. 43-04 Used to set the fusing temperature for each paper. Fusing

25 Main Program 44

• Diagnostic No. 44-01 Used to set enable/disable of correction operations in the image forming (process) section. Process
• Diagnostic No. 44-02 Black image density sensor adjustment. Process
• Diagnostic No. 44-04 Image forming section correction, image density sensor adjustment, density process correction conditions setup. Process
• Diagnostic No. 44-06 Used to perform the image forming correction (high density process correction) (process correction). Process
• Diagnostic No. 44-09 Used to check the data related to the image forming section correction (the corrected main charger grid voltage in each print mode, the developing bias voltage, etc.). (Used to check that correction is performed normally or not.) Process
• Diagnostic No. 44-12 Used to check the sampling toner image patch density data in the image forming section correction (high-density correction) (process correction). This diagnostic allows to check if the correction operation is performed normally.) Process
• Diagnostic No. 44-13 Color image density sensor adjustment (Adjustment by the adjustment jig). Process
• Diagnostic No. 44-14 Used to monitor the output level of the fusing temperature sensor, the machine temperature sensor, and the humidity sensor. Others
• Diagnostic No. 44-21 Used to store color balance adjustment data. (Half tone image correction initial setting) (After execution of color balance adjustment with
• Diagnostic No. 46-21, this diagnostic must be executed.)
• Diagnostic No. 44-22 Used to check each color toner patch Image density UITU in half tone image forming section correction (process correction). (This diagnostic allows to check if correction operation is performed normally.) Process
• Diagnostic No. 44-24 Used to check the half tone correction result. (This diagnostic allows to check if correction is executed properly or not.) Process
• Diagnostic No. 44-25 Setting the half tone correction conditions. Process

25 Main Program 44

• Diagnostic No. 44-26 Used to execute half tone correction compulsorily. Process
• Diagnostic No. 44-27 Used to clear the half tone correction data and set to the default level. Process
• Diagnostic No. 44-36 Color image density sensor and black image density sensor adjustment (simple adjustment) Process

26 Main Program 46

• No. 46-01 Used to adjust the copy density of each color copy mode in the low-density area. The copy densities of all colors in the low-density areas are changed. Process
• Diagnostic No. 46-02 Used to adjust the copy density of the low-density area in each monochrome copy mode. The copy density of the low-density area is changed. Process Diagnostic No. 46-04 Used to adjust the image density (color mode) in the network scan mode. Scanner
• Diagnostic No. 46-05 Used to adjust the image density (monochrome mode) in the network scan mode. Scanner
• Diagnostic No. 46-06 1. Used to set the CCD black level offset level. 2. Used to set the CCD white level gain. Scanner
• Diagnostic No. 46-08 Image color balance adjustment in the network scan mode Scanne
• Diagnostic No. 46-09 Used to set the exposure adjustment value in each document feeder unit mode. Document Feeder Diagnostic No. 46-10 Used to adjust the copy color balance (color) (copy document mode) (gamma/density adjustment for each color) Image Processing
• Diagnostic No. 46-11 Used to adjust the copy color balance (color) (text mode/map mode) (gamma/density adjustment for each color) Image Processing
• Diagnostic No. 46-12 Used to adjust the copy color balance (color) (text/printed photo mode/Photograph mode) (gamma/ density adjustment for each color) Image Processing
• Diagnostic No. 46-13 Used to adjust the copy color balance (color) (photograph mode) (gamma/density adjustment for each color) Image Processing
• Diagnostic No. 46-14 Used to adjust the copy color balance (color) (text/photograph mode) (gamma/density adjustment for each color) Image Processing
• Diagnostic No. 46-15 Engine color balance manual correction Image Processing
• Diagnostic No. 46-16 Used to adjust the gamma and density. (Monochrome mode) (The adjustment check pattern is printed.) Image Processing
• Diagnostic No. 46-19 1. Used to set half tone (gamma) selection (destination setting) in the monochrome auto copy mode. 2. Used to set the automatic exposure operation mode (Monochrome copy mode, FAX mode, monochrome scanner mode).e monochrome auto copy mode. Scanner
• Diagnostic No. 46-20 Used to adjust copy color balance (All color copy mode gamma/ density adjustment) (All color copy mode color balance/gamma/ density are changed.) Same as Diagnostic No. 46-21, however, printing is not performed. Image Processing
• Diagnostic No. 46-21 Used to adjust copy color balance (All color copy mode gamma/ density adjustment) (All color copy mode color balance/gamma/ density are changed.) Image Processing
• Diagnostic No. 46-23 Used to set Enable/Disable of half-tone high-density correction.
• Diagnostic No. 46-24 Used to adjust the copy color balance automatically. (All color copy mode gamma/density adjustment)
• Diagnostic No. 46-25 Used to adjust copy color balance (Single color mode) Image Processing
• Diagnostic No. 46-26 Used to set the copy color balance adjustment to the default. (Single color copy mode) Image Processing
• Diagnostic No. 46-27 Used to adjust the gamma/density in the black edge section of the copy mode image. (Black text and black line reproduction adjustment) Image Processing
• Diagnostic No. 46-35 Image process setting in the Color manual mode Image Processing
• Diagnostic No. 46-40 Collective adjustment of FAX mode (all modes) document scan density (When the FAX is installed) ICU PWB/ FAX
• Diagnostic No. 46-41 Used to adjust the FAX mode (normal mode) document scan density (when the FAX is installed) ICU PWB/ FAX
• Diagnostic No. 46-42 Used to adjust the FAX mode (fine text mode) document scan density (when the FAX is installed). ICU PWB/ FAX
• Diagnostic No. 46-43 Used to adjust the FAX mode (super fine mode) document scan density (when the FAX is installed). ICU PWB/ FAX
• Diagnostic No. 46-44 Used to adjust the FAX mode (ultra-fine mode) document scan density (when the FAX is installed). ICU PWB/ FAX