Xerox WorkCentre C226

18 Main Program 26

• Diagnostic No. 26-02 1. Used to set the paper size of the LCC. (When the paper size is changed, the software setup must be changed accordingly with this diagnostic.) 2. Used to detect 8.5" x 13" (INCH Series) paper or documents and to set the display mode. (All paper feed modes) 3. Used to set the display form of the paper kind in the manual paper feed mode. Paper Feed
• Diagnostic No. 26-03 Used to set the auditor specification mode. Setting must be made according to the use conditions of the auditor. Auditor
• Diagnostic No. 26-05 Used to set the count mode of the total counter and the maintenance counter.
• Diagnostic No. 26-06 Used to set the destination specifications (paper, fixed copy magnification ratios, image (process) correction, machine operation in case of an error. etc.).
• Diagnostic No. 26-35 Used to set whether the fault history display by Diagnostic No. 22-04 is displayed as one fault or as the accumulated number of continuous faults when two or more faults of the same kind occur continuously.
• Diagnostic No. 26-38 Used to set Continue or Stop printing when the maintenance timing (replacement timing of each consumable part) is reached.
• Diagnostic No. 26-41 Used to set Enable or Disable of AMS operation in the centerbinding mode.
• Diagnostic No. 26-49 Used to set the copy speed mode. Diagnostic No. 26-50 Used to set Black-White reverse, group rounding, and scanner send time display.
• Diagnostic No. 26-52 Used to set YES/NO of count up of non-copy paper (cover or insertion paper).
• Diagnostic No. 26-53 Used to set Enable or Disable auto color calibration (auto adjustment of color balance and density).
• Diagnostic No. 26-54 Used to set Enable or Disable of auto color calibration for the printer.
• Diagnostic No. 26-57 Used to set the model name for use as the status information.
• Diagnostic No. 26-65 Used to set the finisher alarm mode.
• Diagnostic No. 26-69 Used to set the operation specifications in case of toner cartridge life near end.
• Diagnostic No. 26-72 Used to set disable/enable of the high image quality mode in BW copy.

19 Main Program 27

• Diagnostic No. 27-01 Used to set the specifications for operations in case of communication trouble between the host computer and MODEM (machine side). (When communication trouble occurs between the host computer MODEM and the machine, the self diagnostic display (U7-00) is printed and setting for inhibition of print or not is made.) Communication
• Diagnostic No. 27-05 Used to enter the machine tag number (This function allows to check the tag number of the machine with the host computer.) Communication

20 Main Program 30

• Diagnostic No. 30-01 Used to check the operation of sensors and detectors in the paper feeder, paper transport, paper exit sections and the related circuits.
• Diagnostic No. 30-02 Used to check the operation of sensors and detectors in the paper feeder section and the related circuits. (The operation of the paper feeder sensors and detectors can be monitored with the LCD display.) Paper Feeder

21 Main Program 33

• Diagnostic No. 33-01 Used to check the operation of the card reader and the sensors and the related circuits. (The card reader sensor operation can be monitored with the LCD display).

22 Main Program 40

• Diagnostic No. 40-01 Used to check the operation of the manual feed tray paper size detector and the related circuit. (The operation of the manual feed tray paper size detector can be monitored with the LCD display). Paper Feeder
• Diagnostic No. 40-02 Used to adjust the manual feed tray paper width detector detection level. Paper Feeder
• Diagnostic No. 40-07 Used to enter the adjustment value of the manual paper feed tray paper width detector detection level. Paper Feeder

23 Main Program 41

• Diagnostic No. 41-01 Used to check the operation of the Document Size Sensors and the related circuit. Sensor ON/OFF check Others
• Diagnostic No. 41-02 Used to adjust the Document Size Sensors detection level. Others
• Diagnostic No. 41-03 Used to check the operation of the Document Size Sensors and the related circuit. Current sensor (A/D) value. Others