Xerox WorkCentre 7835
Troubleshooting. Image Quality. IQ06 SLED Transfer Cycle Lines RAP
This RAP is used to eliminate cyclical matte lines or black lines that appear in the process direction.
Process Speed | Pitch |
---|---|
175mm | 9.5mm |
121mm | 6.1mm |
79mm | 4.2mm |
Initial Actions
- 1.Check customer print to verify cyclical matte lines or black lines that appear in the process direction
- Use the LED Print Head (LPH) Cleaner to clean the LPH surface (PL 2.1).
NOTE: This problem must be distinguished from Developer trimmer jam. Do not replace the LPH without giving this consideration. - Perform IQ35 Process Direction Bands, Streaks, and Smears RAP. If this does not resolve the problem, continue with this RAP
- Print test pattern -12 (dC612).
Procedure
If the problem occurs in the dC612-12 test pattern print, go to IQ39, Missing Colors RAP.