Xerox WorkCentre 5330
Service Mode 05. Initialize Hard Disk
Purpose
This routine initializes Partition A of the HDD. Partition A contains the following data: added fonts, forms for ART EX, ART IV (optional), PC-PR201H, ESC/P, and HP-GL/2 (optional), ART IV User Defined Data, and SMB folder.
Initialization Procedure
- Enter UI Diagnostic mode (Accessing UI Diagnostics).
- Press the Machine Status button on the Control Panel.
- Select the Tools tab on the UI screen.
- System Settings and Common Service Settings will be selected and displayed.
- In the Features column, scroll to and select Maintenance / Diagnostics, then select Initialize Hard Disk.
- Select Partition A then select Start.
- A confirmation message appears. Select Yes.
- A message stating “Partition A has been initialized” will appear. Select Confirm.
- Select Close.
- Select Exit (Keep Log).
- Select Yes or No, as appropriate, to the confirmation message. The machine will reboot into user (Guest) mode.
This completes the initialization of Partition A.