Xerox WorkCentre 5325
Service Mode 04. NVM Read/Write
Purpose
It is possible to refer to or set/change the NVM data.
NOTE: All the NVM data including the NVM for the Key Operator are accessible. However, Billing and Auditron Administration Password cannot be rewritten.
Procedure
- Enter UI Diagnostics (Accessing UI Diagnostics)
- Select NVM Read/Write on the Maintenance/Diagnostics screen.
NOTE: The machine does not accept, for example, 700-6 as an abbreviation of 700-006. When a number starts with 0, the 0 must be entered. - Input the Chain-Link number and select Confirm / Change.
- The Current Value and the New Value columns are displayed.
- Enter the value that you wish to change to into the New Value column using the keypad and select Save. The entered value can be cleared using the C button.
NOTE: If the entered value is invalid, the following message is displayed: Incorrect value. Please re-enter. For a complete list of NVM locations and descriptions, refer to NVM Tables, under the Library tab of the Service Interface - The entered number is displayed in the Current Value column.
- Select Close to return to the Maintenance / Diagnostics screen.