Xerox Phaser 3610
Service Mode. Motor Test (Digital Output)
Checks whether the DO (digital output) components such as motors and clutches are functioning properly. You can enable the test for each DO component and check the operation from the outside, which helps you judge which component functions normally.
The Motor Test allows you to operate all components at one time. If the interlock is opened during a motor test, the operation of each component is stopped.
Note:
Except for 010-001, and 042-003, set LVPS 24V (041-001) to ON (EXEC). Otherwise, the component does not operate.
Motor Test Parameter Table
| Chain | Link | Component |
|---|---|---|
| 010 | 001 | Fusing Relay |
| 041 | 001 | Low Voltage Power Supply 24V |
| 042 | 001 | Rear Fan (Normal) |
| 042 | 002 | Rear Fan (Half) |
| 042 | 003 | LVPS Fan |
| 061 | 001 | ROS Motor [Motor Polygon ASSY] |
| 071 | 001 | Main Motor [DRIVE ASSY MAIN] (Normal) |
| 071 | 002 | Main Motor [DRIVE ASSY MAIN] (Half) |
| 071 | 003 | Main Motor [DRIVE ASSY MAIN] (Low) |
| 071 | 004 | MSI Feed Solenoid [SOLENOID FEED MSI] (Auto OFF) |
| 071 | 005 | Tray 1 Feed Clutch [CST FEED CLUTCH] |
| 071 | 006 | Regi Clutch |
| 071 | 007 | Exit Clutch [CLUTCH ASSY EXIT] |
| 071 | 008 | Exit Invert Clutch [CLUTCH ASSY INVERT] |
| 071 | 009 | Option Feeder 1 Motor [(Tray 2)MOTOR ASSY OPTION] (Normal) |
| 071 | 010 | Option Feeder 1 Motor [(Tray 2)MOTOR ASSY OPTION] (Half) |
| 071 | 011 | Option Feeder 1 Motor [(Tray 2)MOTOR ASSY OPTION] (Low) |
| 071 | 012 | Option Feeder 2 Motor [(Tray 3)MOTOR ASSY OPTION] (Normal) |
| 071 | 013 | Option Feeder 2 Motor [(Tray 3)MOTOR ASSY OPTION] (Half) |
| 071 | 014 | Option Feeder 2 Motor [(Tray 3)MOTOR ASSY OPTION] (Low) |
| 071 | 015 | Option Feeder 3 Motor [(Tray 4)MOTOR ASSY OPTION] (Normal) |
| 071 | 016 | Option Feeder 3 Motor [(Tray 4)MOTOR ASSY OPTION] (Half) |
| 071 | 017 | Option Feeder 3 Motor [(Tray 4)MOTOR ASSY OPTION] (Low) |
| 071 | 018 | Option Feeder 1 Feed Clutch [(Tray 2)CLUTCH ASSY OPT FEED] (Auto OFF) |
| 071 | 019 | Option Feeder 2 Feed Clutch [(Tray 3)CLUTCH ASSY OPT FEED] (Auto OFF) |
| 071 | 020 | Option Feeder 3 Feed Clutch [(Tray 4)CLUTCH ASSY OPT FEED] (Auto OFF) |
| 071 | 021 | Option Feeder 1 Take Away Clutch [(Tray 2)CLUTCH ASSY REGI] |
| 071 | 022 | Option Feeder 2 Take Away Clutch [(Tray 3)CLUTCH ASSY REGI] |
| 071 | 023 | Option Feeder 3 Take Away Clutch [(Tray 4)CLUTCH ASSY REGI] |
| 093 | 001 | Toner Dispense Motor [MOTOR DISP] (Normal) |
| 093 | 002 | Toner Dispense Motor [MOTOR DISP] (Half) |