Xerox Phaser 3610
Service Mode. How To Enter
Phaser 3610
- Hold down the Up and Down arrow buttons and turn “On” the power of the printer.
- Hold buttons until the display changes from Diagnosing to the Service Mode menu.
After Service Mode is started, use the buttons on the control panel and messages displayed in the LCD to operate Service Mode. Use the Stop Button to return to the previous menu.
WorkCentre 3615
- Start Service Mode by holding down the 2 and 8 buttons on the Control Panel while turning “On” the printer.
- Hold buttons until the display changes from Please Wait to the Service Mode menu.
After entering Service Diagnostics, use the touchscreen buttons and messages displayed in the LCD to operate the Service Mode. Use the Back Arrow on the UI to return to the previous menu.