Xerox Phaser 3330
Service Mode. How to Enter
Enter Service Mode Phaser 3330
To enter Service Mode, press Menu, and then press the # Key, enter 1934 then press OK.
Service Mode Menu
The Service Mode menu consists of 6 high level menu items: Jobs, Information, Tray Management, Tray Paper Settings, Tools, and Troubleshooting.
Printer Information
- Firmware Version
- HFSI
- Usage Counters
- Billing Meters
- Performance Counters
Printer Routines
- DC 612
- DC 131 NVM RAM
- DC 132 NVM RAM Initialization
- DC 330 Component Control
- DC 305 UI Test
Other Routines
- Memory Clear
- Format SD
- Set Machine Serial Number
Log Backup
- Capture Log
- Off
- Level 1
- Level 2
Exit Diagnostics
- Yes/No
Enter Service Mode WorkCentre 3335/3345
To enter Service Mode, press and hold Log In, and then press the # Key, enter 1934 then press Start.
Service Mode Menu
The Service Mode menu consists of 5 high level menu items: General, Service Information, Copier Diagnostics, FAX & NetWorking (NW), and Log Backup.
General Information
- Serial Number:
- Images Since Last Call:
- System Software Version:
- IP Address:
Service Information
- dc104 Usage Counters
- dc108 Software Version
- dc109 Fax Protocol Report
- dc120 Fault Counters
- dc122 Fault History
- dc135 HFSI
- Supplies Report...
Copier Diagnostics
- dC131 NVM Read/Write
- dc132 NVM Initialization
- dc305 UI Test
- dc330 Component Control
- dc612 Print Test Pattern
- Format Hard Drive
- Memory Clear
- Shading Test
- Serial Number Reset
Fax & NW Diagnostics
- dc131 NVM Read/Write-Fax
- dc132 NVM Initialization-Fax
- dc330 Component Control-Fax
- dc132 NVM Initialization-Fax