Xerox Phaser 3040
Troubleshooting. AC Power Troubleshooting
Initial Actions
- Cycle printer power.
- If the problem persists, follow the procedure below.
Troubleshooting Procedure Table
Step | Actions and Questions | Yes | No |
---|---|---|---|
1 | When the printer is turned on, can you hear the motor? | Go to “DC Power Troubleshooting” | Go to step 2. |
2 | Connect the power cord to a different outlet. Does the printer now work? |
Complete. | Go to step 3. |
3 | Check that the power cord is plugged in to both the printer and the outlet. Does the printer now work? |
Complete. | Go to step 4. |
4 | Disconnect the power cord and wait 1 minute. Reseat all of the connectors on the LVPS, and then turn the printer on. Does the printer now work? |
Complete. | Go to step 5. |
5 | Disconnect the power cord and wait 1 minute. Reseat the AC Inlet Harness, and then turn the printer on. Does the printer now work? |
Complete. | Replace the LVPS |