Toshiba e-Studio 855

General Descriptions for PM Procedure

Perform the preventive maintenance in the following timing.

e-STUDIO555:every 460,000 sheets
e-STUDIO655:every 515,000 sheets
e-STUDIO755:every 540,000 sheets
e-STUDIO855:every 600,000 sheets

(1) Preparation

• Ask the user about the current conditions of the equipment and note them down.
• Before starting maintenance, make some sample copies and store them.
• See the replacement record and check the parts to be replaced in the PM support mode (6S-2) or list printing mode (9S-103).
  6S-2 : [6] + [START] + [POWER] ON → [2] → [START]
  9S-103 : [9] + [START] + [POWER] ON → [103] → [START]
• Turn OFF the power and make sure to unplug the equipment.

(2) Perform a preventive maintenance using the following checklist and illustrations. Refer to the Service Manual if necessary.

(3) Plug in the equipment after the maintenance has been finished. Then turn ON the power and make some copies to confirm that the equipment is working properly.