Toshiba e-Studio 557
Troubleshooting. Image 4. Toner offset
Toner offset (Shadow image appears approx. 188 mm toward the dark image.)
Defective area | Step | Check items | Prescription |
---|---|---|---|
Density | 1 | Is the density too high? | Adjust the density. |
Fuser unit | 2 | Is the pressure of the fuser roller normal? | Check the pressure releasing parts and pressurization mechanism. |
3 | Is the thermistor in contact with the fuser roller? | Contact the thermistor with the fuser roller. | |
4 | Is there a scratch on the fuser roller surface? | Replace the fuser roller. | |
5 | Has the fuser roller reached its PM life? | Replace the fuser roller. | |
6 | Is the setting temperature of the fuser roller normal? | Check the adjustment values of fuser roller temperature? (08-2009, 08-2010) | |
Fuser unit | 7 | Using the specified fuser roller and the pressure roller? | Use the specified fuser roller and the pressure roller. |
8 | Is the pressurization of cleaning web normal? | Check the installation state of cleaning web mechanism. | |
9 | Is the cleaning web transported normally? | Check the drive system of the cleaning web. Check and correct setting (08-2260, 08-6352-6, 08- 6352-7) | |
10 | Has the cleaning web reached its PM life? | Replace the cleaning web. | |
11 | Using the specified cleaning web? | Use the specified cleaning web. | |
12 | Is there any trouble with the thermistor? | Clean or replace the thermistor. | |
Paper | 13 | Has the appropriate paper type been selected? | Select a proper mode. |
14 | Is the setting temperature of the fuser roller in each paper type normal? | Check the setting and correct it. 08-2010, 08-2028, 08-2049, 08- 2050, 08-2051 | |
15 | Using the recommended paper? | Use the recommended paper. | |
Developer material/Toner | 16 | Using the specified developer material and toner? | Use the specified developer material and toner. |
Scanner | 17 | Are the original glass (especially the position of shading correction plate), mirror and lens dirty? | Clean them. |