Toshiba e-Studio 5508A
Service Mode. How to Enter
FS Menu
[FUNCTION CLEAR] + [START] + [POWER ON] → Enter a service password and press [OK].
- 03 TEST MODE
- 04 TEST PRINT MODE
- 05 ADJUSTMENT MODE → CLASSIC *2
- 08 SETTING MODE → CLASSIC *2
- 20 PM SUPPORT MODE
- 30 LIST PRINT MODE
- 11 FAX CLEAR MODE
- 12 FAX LIST PRINT MODE
- 13 FAX FUNCTION MODE
- 19 RAM EDIT MODE *3
HS Menu
[HOME] + [START] + [POWER ON]→ Enter a service password and press [OK].
- 01 Control Panel Check
- 49 Firmware Update
- 59 SRAM Data Cloning
- 73 Firmware Assist
- 74 HDD Assist
- 75 File System Recovery
- 76 SRAM Maintenance
*1 FS menu: Select the mode and press [NEXT]. HS menu: Select the icon of the mode.
*2 Press [CLASSIC] displayed at the upper right of the menu.
*3 This is not used generally
Cancelation of the self-diagnostic mode
The modes, which can be entered from [FS Menu], can be canceled by the following methods.
- When [FS Menu] is displayed on the screen: Press [FS Menu] to return to the menu screen. Press [NORMAL]. The self-diagnostic mode finishes and the [HOME] screen appears. Rebooting/non-rebooting of the equipment will be performed depending on the mode worked and the code operated.
- When only [Return] is displayed on the screen: Press [Return] for several times until [FS Menu] is displayed on the screen. When [FS Menu] appears, press it.
- When neither [Return] nor [FS Menu] are not displayed on the screen: Press the [ON/OFF] button and perform the shut-down operation on the screen displayed.
To cancel the modes, which can be entered from [HS Menu], press the [ON/OFF] button for a few seconds to shut down the equipment.