Toshiba e-Studio 351c
Maintenance. Checklist 2
F. Main charger
Items to check | Cleaning | Lubrication/ Coating |
Replacement (KD) |
Operation check |
Parts list <P-I> | Remarks | |
---|---|---|---|---|---|---|---|
F1 | Main charger case | B | *f1 | ||||
F2 | Main charger wire | 130/160/200 | O | 28-15 | *f1 | ||
F3 | Contact point of terminals | B | 28-4,9 | ||||
F4 | Charger wire cleaning pad | 130/160/200 | 28-12 | ||||
F5 | Main charger grid | 130/160/200 | 28-21 |
G. Drum/Cleaner related section
Items to check | Cleaning | Lubrication/ Coating |
Replacement (KD) |
Operation check |
Parts list <P-I> | Remarks | |
---|---|---|---|---|---|---|---|
G1 | Photoconductive drum | 130/160/200 | 103-1 | Refer to Chapter 4.8.2 | |||
G2 | Drum stay | B | *g1 | ||||
G3 | Whole cleaner unit | B | |||||
G4 | Drum cleaning blade | 130/160/200 | 32-10 | *g2 | |||
G5 | Drum cleaner brush | 130/160/200 | 32-5 | *g2 | |||
G6 | Recovery blade | B | R | 32-26 | *g3 | ||
G7 | Used toner auger drive section | W1 | |||||
G8 | Discharge LED | B | 28-32 | ||||
G9 | Ozone filter | 130/160/200 | 14-31 |
Note:
Check the color deviation after replacing G1 and G4.
H. Toner bag
Items to check | Cleaning | Lubrication/ Coating |
Replacement (KD) |
Operation check |
Parts list <P-I> | Remarks | |
---|---|---|---|---|---|---|---|
H1 | Toner bag | 50 | 103-6 |
I. Black developer unit
Items to check | Cleaning | Lubrication/ Coating |
Replacement (KS) |
Operation check |
Parts list <P-I> | Remarks | |
---|---|---|---|---|---|---|---|
I1 | Whole black developer unit | B | |||||
I2 | Black developer unit drive section | W1 | |||||
I3 | Developer material (K) | 100/120/150 | 103-2 | *i1 | |||
I4 | Front shield | B | R | 34-39 | |||
I5 | Oil seal (4 pcs.) | AV | R | 34-3,15 | *i2 | ||
I6 | Guide roller | B or A | 34-17 | ||||
I7 | Toner cartridge drive gear | W1 | |||||
I8 | Side shield | B | R | 34-37,38 | |||
I9 | Front bearings of mixers | AV | R | 34-8 | *i3 |
J. Color developer unit / Revolver unit
Items to check | Cleaning | Lubrication/ Coating |
Replacement (KS) |
Operation check |
Parts list <P-I> | Remarks | |
---|---|---|---|---|---|---|---|
J1 | Whole color developer unit (Y, M and C) | B | |||||
J2 | Color developer unit drive section (Y, M and C) | W1 | |||||
J3 | Developer material (Y, M, and C) | 24/30/37.5 | 103-3 | *j1 | |||
J4 | Front shield (Y, M and C) | B | R | 33-24 | |||
J5 | Oil seal (4 pcs. for each color) |
AV | R | 33-4,14 | *j2 | ||
J6 | Toner cartridge drive gear (Y, M and C) | W1 | |||||
J7 | Revolver drive gear | W1 | |||||
J8 | Color auto-toner sensor | B | AV | 36-18 | *j3 | ||
J9 | Side shield | B | R | 33-39,40 | |||
J10 | Polarity adjustment plate | FL | 33-9 | *j4 | |||
J11 | Color toner cartridge sensor | B | 36-104 | *j5 | |||
J12 | Front bearings of mixers | AV | R | 33-12 | *j6 |