Toshiba e-Studio 3510c
Adjustment. 4 Color Registration Control
After having finished the “Forced performing of image quality closed-loop control (05-2742)” procedure, perform the “Forced performing of color registration control adjustment (05-4719)” procedure.
Code: 4719
Item to be adjusted
Forced performing of color registration control
Contents
<Procedure>
- While pressing [0] and [5] simultaneously, turn the power
ON. → Adjustment mode - Key in [4719] and press the [START] button.
- When the adjustment finishes normally, the equipment returns to the initial state of Adjustment Mode.
If the following errors are displayed after performing 05-4719, clear the error by following the steps below, and then perform 05-4719 again.
<When "Toner bag replacement" is displayed>
- Replace the toner bag with a new one and close the front cover.
- Press and hold the [ENERGY SAVER] button for a few seconds to shut down the equipment.
- Turn the power ON.
- Release the toner bag full status by the warming-up operation.
- Check that "WAIT" is displayed.
<When an adjustment error is displayed>
- Press and hold the [ENERGY SAVER] button for a few seconds to shut down the equipment in order to check the toner empty status.
- Turn the power ON.
- Check the toner supply operation in warming-up. When a message prompts you to replace the toner cartridge, open the front cover and replace the cartridge with a new one.
- Check that "WAIT" is displayed.