Toshiba e-Studio 3015AC
Service Mode. Overview
This equipment consists of two servicing menus which have different start-up methods. Setting and adjustment can be performed by entering into a mode such as [05 ADJUSTMENT MODE] or [49 Firmware Update] from each menu.
FS Menu
Mode | Contents |
---|---|
03 TEST MODE | Checks the status of input/output signals. |
04 TEST PRINT MODE | Outputs the test patterns. |
05 ADJUSTMENT MODE | Adjusts various items. |
08 SETTING MODE | Sets various items. |
20 PM SUPPORT MODE | Clears each counter. |
30 LIST PRINT MODE | Prints various lists or outputs them in a CSV format. |
31 CHART PRINT MODE | Prints the charts. |
11 FAX CLEAR MODE | Sets the fax board |
12 FAX LIST PRINT MODE | Outputs the contents set for the fax functions. |
13 FAX FUNCTION MODE | Sets the fax functions. |
19 RAM EDIT MODE | This is the mode for the special settings. (This is not used generally.) |
35 DATA BACKUP/RESTORE MODE | Backs up or restores data. |
36 CLONING | Creates and installs clone files. |
37 LICENSE MANAGEMENT | Manages the license of applications. |
HS Menu
Mode | Contents |
---|---|
01 Control Panel Check | Checks various contents regarding the LCD, LED, hard keys and digital keys on the control panel. |
49 Firmware Update | Performs firmware update with a USB storage device. |
59 SRAM Data Cloning | Backs up the SRAM data to a USB storage device. |
73 Firmware Assist | Clears error flags or SRAM, or safely deletes data in the HDD or SRAM to support the replacement of the SYS board, SRAM or HDD. |
74 HDD Assist | Assists the Security HDD by checking the type of the mounted HDD, reverting the HDD to a factory default or removing keys. |
75 File System Recovery | Checks, recovers or initializes the file system (HDD). |
76 SRAM Maintenance | Recovers the equipment from particular errors such as F800 or F900 |
* Only the modes which are available for this equipment are displayed on each menu.