Toshiba e-Studio 2500c

Symbols/value used in the checklist

A: Clean with alcohol
B: Clean with soft pad, cloth or vacuum cleaner
L: Launa 40 SI: Silicon oil
W1: White grease (Molykote X5-6020)
W2: White grease (Molykote HP-300)
AV: Alvania No.2
FL: Floil (GE-334C)
Value: Replacement cycle
R: Replace if deformed or damaged
O: After cleaning or replacement, confirm there is no problem.

Preventive Maintenance Checklist

Notes:

1. Perform cleaning and lubricating in the following timing. Lubricate the replacement parts according to the replacement cycle.

   Model name	Black	Full color
   e-STUDIO2500c	every 70,000 sheets	every 50,000 sheets
   e-STUDIO3500c	every 70,000 sheets	every 70,000 sheets
   e-STUDIO3510c	every 70,000 sheets	every 70,000 sheets

2. The value under "Replacement" indicates the number of output pages in either the black or the full color mode. The value in parentheses indicates the one in the full color mode in e- STUDIO2500c.
3. The replacement cycle of the parts in the feeding section equals to the number of sheets fed from each paper source.
4. Be careful not to put oil on the rollers, belts and belt pulleys when lubricating.
5. Parts list <P-I> represents the page item in "e-STUDIO2500c/3500c/3510c Service Parts List".

A. Scanner

Items to check		Cleaning	Lubrication/ Coating	Replacement (x 1,000 sheets)	Operation check	Parts list <P-I>	Remarks
A1	Original glass	B or A				28-1	*a1
A2	ADF original glass	B				28-2	*a2
A3	Mirror-1	B
A4	Mirror-2	B
A5	Mirror-3	B
A6	Reflector	B
A7	Lens	B				12-10
A8	Exposure lamp			R	O	26-6
A9	Automatic original detection sensor	B			O	12-12
A10	Slide sheet (front and rear)	B or A		R