Toshiba e-Studio 230L
Service Mode. 1 How to Enter
Self-diagnosis Modes
Mode | For start | Contents | For exit | Display |
---|---|---|---|---|
Control panel check mode | [0]+[1]+ [POWER] | All LEDs on the control panel are lit, and all the LCD pixels blink. | [POWER] OFF/ON | - |
Test mode | [0]+[3]+ [POWER] | Checks the status of input/output signals. | [POWER] OFF/ON | 100% C A4 TEST MODE |
Test print mode | [0]+[4]+ [POWER] | Outputs the test patterns. | [POWER] OFF/ON | 100% P A4 TEST PRINT |
Adjustment mode | [0]+[5]+ [POWER] | Adjusts various items. | [POWER] OFF/ON | 100% A A4 TEST MODE |
Setting mode | [0]+[8]+ [POWER] | Sets various items. | [POWER] OFF/ON | 100% D TEST MOD |
List print mode | [9]+[START] +[POWER] |
Prints out the data lists of the codes 05 and 08, PM support mode and pixel counter. | [POWER] OFF/ON | 100% UA A4 LIST PRINT |
PM support mode | [6]+[START] +[POWER] |
Clears each counter. | [POWER] OFF/ON | 100% K TEST MODE |
Firmware update mode | [8]+[9]+ [POWER] | Performs updating of the system firmware. | [POWER] OFF/ON | - |
Notes:
- To enter the desired mode, turn ON the power while two digital keys designated to each mode (e.g. [0] and [5]) are pressed simultaneously.
- When the optional FAX unit is installed, Faxes received automatically during the self-diagnosis mode may not be printed out. Be sure to disconnect the modular code from the line connectors (LINE1, LINE2) of the equipment before starting the self-diagnosis mode. Also, be sure to finish the self-diagnosis mode by turning the power OFF and back ON before connecting the modular code.
Notes:
- A mode can be canceled by [POWER] OFF/ON when the LED is lit and the LCD is blinking.
- Button Check
Buttons with LED (Press to turn OFF the LED.)
Buttons without LED (Press to display the message on the control panel.)
Button on touch panel (Press to display the screen on the control panel at power-ON.)