Toshiba e-Studio 2303A
Troubleshooting. Image 2. Background fogging
Defective area | Step | Check items | Prescription |
---|---|---|---|
Density reproduction | 1 | Check the reproduction of the image density. | Adjust the density. |
Background reproduction | 2 | Check the background reproduction. | Adjust the background. |
Printer section | 3 | Check test print image (04-114). | Go to step 4 if there is any problem on image. |
Scanner | 4 | Are the original glass and CIS unit dirty? | Clean them. |
Auto-toner | 5 | Is the auto-toner sensor normal? | Check the performance of the autotoner sensor and readjust. |
6 | Is the toner supplied normally? | Check the motor and circuits. | |
High-voltage transformer (Main charger / Developer bias) | 7 | Is the high-voltage transformer output defective? | Adjust the output, or replace the transformer. |
Developer unit | 8 | Is the contact between the drum and developer material normal? | Adjust the doctor-sleeve gap and polarity. |
Developer material/Toner/ Drum | 9 | Using the specified developer material, toner and drum? | Use the specified developer material, toner and drum. |
10 | Have the developer material and drum reached their PM life? | Replace the developer material and drum. | |
11 | Is the storage environment of the toner cartridge 35°c less without dew? | Use the toner cartridge stored in the environment within specification. | |
Drum cleaning blade | 12 | Is the drum cleaned properly? | Check the pressure of the drum cleaning blade. |
Toner dusting | 13 | Is toner heaped on the seal of the developer unit? | Remove the toner and clean the developer unit. |