Toshiba e-Studio 195i
Service Mode 01. How to Enter
Self-diagnosis Modes
Mode | For start | Contents |
---|---|---|
Adjustment mode | [0]+[5]+ [POWER] | Adjusts various items. |
Setting mode | [0]+[8]+ [POWER] | Sets various items. |
Function setting mode | [1]+[3]+ [POWER] | Conducts OPE. PANEL TEST, PRINT TEST, SENSOR TEST, OUTPUT TEST. |
RAM clear mode | [Specified keys]+ [POWER | RAM clear. |
Country/Region mode | [0]+[2]+ [POWER] | Country/Region code. |
For exit:
[POWER] OFF/ON
Test Modes
Mode | For start | Contents |
---|---|---|
AUTO TEST | Press the [USER FUNCTIONS] button while READY is indicated, and then press the [*], [#], [*], [*] keys. | Use this mode to diagnose the equipment by automatically performing a series of tests. |
INDIVIDUAL TEST | Use this mode to perform a test dialogically and locate a failure from the test result. | |
TEST RESULT LIST | Use this mode to print the results of "AUTO TEST" and "INDIVIDUAL TEST". | |
FUNCTION TEST | Use this mode to check each function of the equipment. | |
MAINTENANCE | Use this mode to perform setups for Memory Clear, Fax, etc. | |
SERVICE LIST | Use this mode to Print PROTOCOL TRACE, TOTAL ERROR, etc. | |
FUNCTION | Use this mode to Print FUNCTION LIST. |
For exit:
READY: Press the [USER FUNCTION S] button.
Test Mode Menu: Press the [*], [#], [*], [*] keys.
Note:
To enter the desired mode, turn ON the power while two digital keys designated to each mode (e.g. [0] and [5]) are pressed simultaneously.