Toshiba DP2110
Service Mode 1. How to Enter
Self-diagnosis Modes
Mode | For start | Contents | For exit | Display |
---|---|---|---|---|
Input check mode |
[0]+[3]+ [POWER] |
Checks the status of input signals. | [POWER] OFF/ON |
In |
Output check mode |
[0]+[4]+ [POWER] |
Checks the status of output signals. | [POWER] OFF/ON |
Ou |
Test print mode |
[0]+[7]+ [POWER] |
Outputs the test patterns. | [POWER] OFF/ON |
Pr |
Adjustment mode |
[0]+[5]+ [POWER] |
Adjusts various items. | [POWER] OFF/ON |
AJ |
Setting mode | [0]+[8]+ [POWER] |
Sets various items. | [POWER] OFF/ON |
Ad |
List print mode | [9]+[START] +[POWER] |
Prints out the data lists of the codes 05/08 and pixel counter. |
[POWER] OFF/ON |
Lo |
Access code mode |
[8]+[START] +[POWER] |
Registers / deletes the access code. | [POWER] OFF/ON |
--- |
Function setting mode |
[1]+[*]+ [POWER] |
Sets the function table. | [POWER] OFF/ON |
Fu |
Test mode | [1]+[3]+ [POWER] |
Checks the operation of the equipment. | [POWER] OFF/ON |
Ch |
Note:
To enter the desired mode, turn ON the power while two digital keys designated to each mode (e.g. [0] and [5]) are pressed simultaneously.
*1 Turn OFF the power after using the self-diagnosis modes, and leave the equipment to the user.