Sharp MXM905
Simulation mode. A. List of classic mode 26 - 44
Main | Sub | Function (Purpose) | Section | Purpose |
---|---|---|---|---|
26 | 5 | Used to set the count mode of the total counter and the maintenance counter. (A3/11 x 17 size) | Setting | |
6 | Used to set the specifications of each destination (paper, fixed magnification ratio, etc.) | Setting | ||
7 | Used to set the machine ID. | Setting | ||
10 | Used to set the trial mode of the network scanner. | Setting | ||
18 | Used to set YES/NO of the toner save mode operation. (For Japan and UK versions.) | Setting | ||
30 | Used to set the CE mark support (Europe safety standards) operation mode. (Supporting slow start of the fusing heater lamp when driving it) | Setting | ||
32 | Used to set the specifications of the fusing cleaning operation. | Fusing | Setting | |
35 | Used to set the display type of troubles in Sim. 22-4. When two or more same troubles occur continuously, the trouble history is displayed as one trouble or as two or more troubles occurring continuously. | Setting | ||
38 | Used to set whether printing is terminated or not when the developer life is reached or when the fuser web end. | Setting | ||
41 | Used to set YES/NO of the magnification ratio auto select function (AMS) in the center binding mode. | Setting | ||
49 | Used to set the postcard copy speed mode. | Setting | ||
50 | Used to set Enable/Disable of black/white reverse function. | Setting | ||
52 | Used to set whether non-print paper (insertion, cover sheet) is counted or not. | Setting | ||
65 | Used to set the finisher alarm mode. | Setting | ||
69 | Used to set the operating conditions for toner near end. | Setting | ||
73 | Enlargement continuous shoot, A3 wide copy mode image loss (shade delete quantity) adjustment | Setting | ||
74 | Used to set the OSA trial mode. | Setting | ||
78 | Used to set the password of the remote operation panel. | Setting | ||
79 | Used to set YES/NO of the pop-up display of user data delete result. | Setting | ||
27 | 2 | Used to set the FSS function (user registration number, Host server telephone number). | Setting | |
4 | Used to set the FSS function (initializing, call, toner order auto send). | Setting | ||
5 | Used to set the machine tag No. (This simulation allows to check the machine tag No. from the host computer side.) |
Communication (RIC/MODEM) | Setting | |
6 | Used to set of the manual service call. (FSS function) | Setting | ||
7 | Used to set the FSS function (enable, Alert calling) | Setting | ||
9 | Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) | Setting | ||
10 | Used to clear the trouble prediction history information. (FSS function) | Data clear | ||
11 | Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) | Others | ||
12 | Used to check the error history of high density, half-tone potential, and dark potential. | Other | ||
13 | Used to check the history of paper transport time between sensors. | Other | ||
14 | Used to set the FSS function connection test mode. | Setting | ||
15 | Used to display the FSS connection status. | Operation test/check | ||
16 | Used to set the FSS alert send. | Setting | ||
17 | Used to set the FSS paper order alert. | Setting | ||
30 | 1 | Used to check the operation of the sensors and the detectors in other than the paper feed section and the control circuits. | Operation test/check | |
2 | Used to check the operation of the sensors and the detectors in the paper feed section and the control circuits. | Operation test/check | ||
40 | 2 | Used to adjust the detection level of the manual paper feed tray paper width detector. | Paper feed | Adjustment/Setting |
7 | Used to adjust the manual paper feed tray size width detection level. | Paper feed | Adjustment/Setting | |
12 | Used to adjust the tray 4 width detection level. | Paper feed | Adjustment/Setting | |
41 | 1 | Used to check the operation of the document size sensor and the control circuit. | Scanner | Operation test/check |
4 | Use to set the document size sensor. | Scanner | Adjustment/Setting | |
5 | Use to check the document size sensor. | Scanner | Operation test/check | |
43 | 1 | Used to set the fusing temperature in each mode. | Setting | |
2 | Used to set the fusing operation and preheating. | Setting | ||
20 | Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-1) in each paper mode. | Adjustment/Setup | ||
21 | Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. | Adjustment/Setup | ||
24 | Used to set the correction of the temperature adjustment value of SIM 43-1. | Adjustment/Setup | ||
31 | Used to check the operation of the fusing web cleaning motor and the control circuit. | Operation test/check | ||
32 | Used to set the forcible operation of the fusing web cleaning when job end. | Adjustment/Setting | ||
35 | Fusing nip operation check. | |||
44 | 1 | Used to set each correction function of the image forming (process) section. | Process (OPC drum, developing, transfer, cleaning) | Setting |
2 | Used to adjust the process control sensor gain. | Process | Adjustment/Setting | |
3 | A change in the OPC drum surface potential VO due to the OPC drum environment and membrane decrease (life) is detected with the surface potential sensor to correct the grid potential Vg so that the cleaning field is maintained at a constant level. | Process | Operation test/check | |
4 | Used to set the operating conditions of the high density process control. | (Must not be used unless a special change is required.) | ||
5 | Used to set the dark potential adjustment conditions. | Adjustment/Setting |