Sharp MXM700
Simulation mode. List of simulation codes 1 - 23
Main code | Sub code | Operation content | Data save destination/Target | ||
---|---|---|---|---|---|
MFP | Scanner | Engine | |||
1 | 1 | Mirror scan operation | ○ | ||
2 | Optical system sensor check | ○ | |||
2 | 1 | SPF operation aging | ○ | ||
2 | SPF sensor check | ○ | |||
3 | SPF individual load check | ○ | |||
3 | 2 | Finisher sensor check | ○ | ||
3 | Finisher individual load check | ○ | |||
10 | Finisher setting | ○ | |||
30 | Inserter sensor check | ○ | |||
31 | Inserter load operation | ○ | |||
32 | Inserter tray value setting | ○ | |||
4 | 2 | LCC sensor check | ○ | ||
3 | LCC individual load check | ○ | |||
5 | 1 | LCD/LED test | ○ | ||
2 | Heater lamp test | ○ | |||
3 | Copy lamp test | ○ | |||
4 | Discharge lamp test | ○ | |||
6 | 1 | Transport system load operation (Clutch/Solenoid) | ○ | ||
2 | Fan motor test | ○ | |||
3 | Transfer separation motor operation | ○ | |||
7 | 1 | Operation registration (jam detection:No, developing tank detection:No, aging and maintenance warm- up:No, intermittent operation:Yes, shading:No etc.) | ○ | ||
6 | Intermittent aging cycle setting | ○ | |||
8 | Warm-up time display (No aging) | ○ | |||
8 | 1 | DV bias setting | ○ | ||
2 | Main charger grid voltage setting | ○ | |||
6 | Transfer voltage setting | ○ | |||
17 | Transfer roller setting | ○ | |||
18 | Transfer cleaning roller setting | ○ | |||
19 | Fusing bias setting (Not used) | ○ | |||
9 | 1 | ADU output test | ○ | ||
2 | ADU sensor check | ○ | |||
10 | 1 | Toner motor activation | ○ | ||
2 | Toner rest sensor check | ○ | |||
13 | U1 trouble cancellation | ○ | |||
14 | Trouble cancellation | ○ | |||
15 | LCC trouble cancellation | ○ | ○ | ||
16 | U2 trouble cancellation | ○ | ○ | ○ | |
17 | PF trouble cancellation | ○ | |||
21 | 1 | Maintenance cycle set up | ○ | ||
22 | 1 | Counter data display | ○ | ○ | ○ |
2 | JAM/Trouble counter data display | ○ | |||
3 | Paper jam history | ○ | |||
4 | Trouble history | ○ | |||
5 | ROM version data display | ○ | ○ | ○ | |
6 | Data print mode | ○ | |||
7 | Key operator code display | ○ | |||
8 | ORG/Staple counter data display | ○ | ○ | ||
9 | Paper feed counter data display | ○ | |||
10 | System information | ○ | |||
11 | FAX counter data display | ○ | |||
12 | SPF JAM history | ○ | |||
13 | Process data display | ○ | |||
19 | Network scanner counter display | ○ (FAX) | |||
30 | OSA vendor ID display (Application Communication) | ○ | |||
31 | OSA vendor ID display (External account) | ○ | |||
23 | 2 | JAM/trouble data print mode | ○ | ||
80 | Data print mode | ○ |