Sharp MXM3551
Simulation mode. List of codes 30-46
Main | Sub | Functions | Section |
---|---|---|---|
30 | 1 | Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. | |
2 | Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. | ||
30 | Used to check the operation of the motion sensor. | ||
40 | 2 | Manual paper feed tray paper width sensor adjustment. | Paper feed |
7 | Used to set the adjustment value of the manual paper feed tray paper width sensor. | Paper feed | |
12 | Used to adjust the tray 4 width detection level. | Paper feed | |
41 | 1 | Used to check the operations of the document size sensor and the control circuit. | |
2 | Used to adjust the document size sensor detection level. | ||
3 | Used to check the operations of the document size sensor and the control circuit. | ||
43 | 1 | Used to set the fusing temperature in each mode. | |
2 | Used to set the fusing operation and preheating. | ||
20 | Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-1) in each paper mode. | ||
21 | Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. | ||
24 | Used to set the correction of the temperature adjustment value of SIM 43-1. | ||
32 | Used to set various items related to the forcible operation of web cleaning when job end. | Fusing | |
34 | Used to check the fusing lower web cleaning motor operation. | Fusing | |
35 | Fusing nip operation check | Fusing | |
44 | 1 | Used to set each correction operation function in the image forming (process) section. | Image process (Photo conductor/ Developing/Transfer/Cleaning) |
2 | Used to adjust the light quantity adjustment of the process control computer sensor and groundwork reading. | Process | |
4 | Used to set the conditions of the high density process control operation. | Process | |
6 | Used to execute the high density process control forcibly. | Process | |
9 | Used to display the result data of the high density process control operation. | Image process (Photo conductor/ Developing/Transfer/Cleaning) | |
12 | Used to display the operation data of the high density process control and the image density sensor (registration sensor). | Image process (Photo conductor/ Developing) | |
14 | Used to display the output level of the temperature and humidity sensor. | Process (OPC drum, development)/Fusing/LSU | |
15 | Used to set the OPC drum idle rotation. | Process | |
17 | Process refresh execution | Process | |
21 | Used to set the halftone process control target. | Process | |
22 | Used to display the toner patch density level in the halftone process control operation. | Process | |
24 | Used to display the correction target and the correction level in the halftone process control operation. | Process | |
25 | Used to set the calculating conditions of the correction value for the halftone process control. | Process | |
26 | Used to execute the halftone process control compulsory. | Process | |
27 | Used to clear the correction data of the halftone process control. | Process | |
28 | Used to set the process control execution conditions. | Process | |
29 | Used to set the operating conditions of the process control during a job. | Process | |
37 | Used to set the development bias correction level in the continuous printing operation. | ||
43 | Used to display the identification information of the developing unit. | Developing system | |
62 | Used to set the process control execution conditions. | Process | |
46 | 2 | Used to adjust the copy density in the copy mode.(Monochromatic copy) | |
4 | Used to adjust the density in the image send mode.(Color scanner) | ||
5 | Used to adjust the density in the image send mode.(Monochromatic scanner) | ||
8 | Used to adjust the image send mode color balance RGB. | ||
9 | Used to adjust the scan image density. | ||
10 | used to adjust the copy gray balance and gamma (for each copy mode) | ||
16 | Used to perform the engine gray balance manual adjustment (monochrome, all modes). | ||
19 | Used to set the monochrome auto exposure mode. | ||
23 | Used to perform the half tone highest density correction. | ||
24 | Used to perform the engine half tone auto density adjustment. | ||
32 | Used to adjust the document background density reproducibility in the monochrome auto copy mode. | ||
37 | Used to adjust the reproduction capability of monochrome mode color. | ||
39 | Used to adjust the sharpness of FAX send images. | ||
40 | Used to adjust the FAX send image density. (Collective adjustment of all the modes) | ||
41 | Used to adjust the FAX send image density. (Normal) | ||
42 | Used to adjust the FAX send image density. (Fine) | ||
43 | Used to adjust the FAX send image density. (Super Fine) | ||
44 | Used to adjust the FAX send image density. (Ultra fine) | ||
45 | Used to adjust the FAX send image density. (600dpi). | ||
46 | Used to adjust the FAX send image density. (RGB RIP) | ||
47 | Used to set the compression rate of copy and scan images (JPEG). | ||
48 | Used to set the copy output resolution setting.(Change 600DPI/1200DPI every picture mode.) | ||
51 | Used to adjust the gamma for the copy mode heavy paper mode and the image process mode. | ||
52 | Used to set the gamma default for the copy mode heavy paper and the image process mode. (After execution of either SIM46-54 or SIM46-51, the adjustment value is reset to the initial value.) | ||
54 | Used to perform the engine halftone automatic density adjustment (dither). | ||
55 | Used to adjust the drop out color in the image send mode (monochrome manual text mode). | ||
58 | Used to set the copy mode pseudo resolution. (Smoothing process) | ||
60 | Used to adjust the sharpness in the color auto copy mode. | ||
61 | Used to adjust the area separation recognition level. | ||
62 | Used to set the operating conditions of the ACS, the area separation, the background image process, and the auto exposure mode. | ||
63 | Used to adjust the density in the copy low density section. | ||
66 | Used to adjust the reproduction capability of watermarks in the copy/printer mode. | ||
68 | Used to adjust the automatic resolution judgment. | ||
74 | Copy color balance adjustment (Auto adjustment)/Printer color balance adjustment (Auto adjustment) | ||
90 | Used to set the process operation of high-compression PDF images. | ||
91 | Used to adjust the reproduction capability of black text. |