Sharp MXM310N

Outline and purpose

The simulation has the following functions to grasp the machine operating status, identify the trouble position and causes in an earlier stage, and make various setups and adjustments speedily for improving the serviceability of the machine.

1. Various adjustments
2. Setup of specifications and functions
3. Canceling troubles
4. Operation check
5. Various counters check, setup, and clear
6. Machine operating status (operation history) data check, clear
7. Transfer of various data (adjustments, setup, operations, counters)

The operating procedures and the displays differ depending on the form of the operation panel of the machine.

Operating procedures and operations

Entering the simulation mode

1. #/P key (program) ON → Asterisk (*) key ON → CLEAR key ON → Asterisk (*) key ON → Ready for input of a main code of simulation
2. Entering a main code with the 10-key → START key ON
3. Entering a sub code with the 10-key → START key ON
4. Select an item with the scroll key and the item key.
5. The machine enters the mode corresponding to the selected item. Press START key to start the simulation operation. To cancel the current simulation mode or to change the main code and the sub code, press the SYSTEM SETTINGS key.

Canceling the simulation mode to return to the normal mode

1. Press CLEAR ALL key.

How to change the simulation adjustment value set by the touch panel in the adjustment value entry process

a. Target SIM list

3-7, 8-1, 8-2, 8-3, 8-10, 8-11, 8-12, 9-5, 43-1, 44-34, 46-2, 46-9, 46-10, 46-11, 46-18, 46-20, 46-30, 46-31, 48-1, 48-2, 50-1, 50-5, 50-6, 50-10, 50-12, 51-1, 51-2, 51-9, 53-7

b. Touch panel operating procedure

• In the adjustment value setup menu, the selected item is highlighted. Change is made to the highlighted simulation adjustment value.
• If all the list of the adjustment items is not shown on one page, touch [↑] and [↓] button to shift the page.
• To change an adjustment value, touch the select the item to change the adjustment value. (The selected item is highlighted.) Enter the adjustment value and perform one of the following procedures, and the display of the adjustment value of the selected item is renewed as well as the adjustment value.

1. Touch [OK] button.
2. Touch another selected item to change the selection state.
3. If all the list of the adjustment items cover two or more pages, touch [↑] and [↓] button to shift the page.
4. Press [START] key.

* For simulations which allow confirmation print, copying is started after changing the adjustment value. (46-2, 46-9, 46-10, 46-11, 46-18, 48-1, 48-2, 50-1, 50-5, 50-6, 50-10, 50-12, 51-2, the bold-faced items in the above list.)

* If the entry value is outside the adjustable range, an error buzzer sounds and the adjustment value is not renewed. Page shift is not made, either.