Sharp MXM160D
Simulation mode. List of simulation codes 1 - 25
| Main code | Sub code | Contents |
|---|---|---|
| 01 | 01 | Mirror scanning operation |
| 02 | Mirror home position sensor (MHPS) status display | |
| 02 | 01 | Single paper feeder (SPF)/Reversing single pass feeder(RSPF) aging *2 |
| 02 | SPF/RSPF sensor status display *2 | |
| 03 | SPF/RSPF motor operation check *2 | |
| 08 | SPF/RSPF paper feed solenoid operation check *2 | |
| 09 | RSPF reverse solenoid operation check *2 *3 | |
| 11 | SPF/RSPF PS release solenoid operation check *2 | |
| 03 | 02 | Shifter/job separator sensor status display |
| 03 | Shifter operation check | |
| 04 | Job separator operation check *4 | |
| 11 | Shifter home position check | |
| 05 | 01 | Operation panel display check |
| 02 | Fusing lamp and cooling fan operation check | |
| 03 | Copy lamp lighting check | |
| 06 | 01 | Paper feed/transport solenoid operation check |
| 02 | Resist roller solenoid (RRS) operation check | |
| 10 | Main cassette pickup roller cleaning | |
| 07 | 01 | Warm-up display and aging with jam detection |
| 06 | Intermittent aging | |
| 08 | Shifting with warm-up display | |
| 08 | 01 | Developing bias output |
| 02 | Main charger output (Grid = HIGH) | |
| 03 | Main charger output (Grid = LOW) | |
| 06 | Transfer charger output | |
| 09 | 01 | Duplex motor forward rotation check *6 |
| 02 | Duplex motor reverse rotation check *6 | |
| 04 | Duplex motor RPM adjustment *6 | |
| 05 | Duplex motor switchback time adjustment | |
| 10 | - | Toner motor operation |
| 14 | - | Trouble cancel (except for U2) |
| 16 | - | U2 trouble cancel |
| 20 | 01 | Maintenance counter clear |
| 21 | 01 | Maintenance cycle setting |
| 22 | 01 | Counters display |
| 03 | Jam memory display | |
| 04 | Jam total counter display | |
| 07 | Key operator code display | |
| 09 | Paper feed counter display | |
| 13 | CRUM destination display *5 | |
| 14 | P-ROM version display | |
| 15 | Trouble memory display | |
| 22 | SPF/RSPF jam counter display *2 | |
| 24 | 01 | Jam total counter clear |
| 02 | Trouble memory clear | |
| 04 | SPF/RSPF counter clear *2 | |
| 05 | Duplex print counter clear *6 | |
| 06 | Paper feed counter clear | |
| 07 | Drum counter clear | |
| 08 | Copy counter clear | |
| 09 | Printer counter clear | |
| 13 | Scanner counter clear | |
| 14 | SPF/RSPF jam total counter clear *2 | |
| 15 | Scanner mode counter clear | |
| 25 | 01 | Main motor operation check (Cooling fan motor rotation check) |
<Execution inhibit conditions>
*1)Execution is inhibited when the duplex setup is OFF and other than RSPF is set.
*2)Execution is inhibited when OC.
*3)Execution is inhibited when SPF. (Not RSPF)
*4)Execution is inhibited when the job separator is not installed.
*5)Execution is inhibited when the model is not provided with the CRUM.
*6)Execution is inhibited when the duplex setup is OFF.