Sharp MXM1204
Simulation mode. List of simulation codes 16 - 26
Main | Sub | Function (Purpose) | Section | Purpose |
---|---|---|---|---|
16 | - | Used to cancel the self diag U2 trouble. | MFPcnt PWB/PCU PWB/SCU PWB | Cancel (trouble, etc.) |
17 | - | Used to cancel the self diag PF trouble. | Cancel (trouble, etc.) | |
21 | 1 | Used to set the maintenance cycle. | Setting | |
22 | 1 | Used to check the print count value of each section and each operation mode. (Used to check the maintenance timing.) | Adjustment, setting, operation data output and check | |
2 | Used to check the total number of misfeed and trouble. (If the total number of JAM is considerably great, it is judged that repair is required.) | Adjustment/Setting/ Operation data check | ||
3 | Used to check the misfeed position and the number of misfeed. * This data can be used to estimate the trouble position. | Adjustment/Setting/ Operation data check | ||
4 | Used to check the trouble (self diag) history. | Adjustment/Setting/ Operation data check | ||
5 | Used to check the ROM version of each unit (section). | Other | ||
6 | Used to output the list of various setting and adjustment data (simulation, FAX soft switch, counter). | Adjustment/Setting/ Operation data check | ||
8 | Used to check the counter value of the finisher, DSPF, and the scan (reading). | Adjustment/Setting/ Operation data check | ||
9 | Used to check the use quantity (print quantity) of each paper feed section. | Paper feed, ADU, LCC | Adjustment/Setting/ Operation data check | |
10 | Used to check the system configuration (option, internal hardware). | Adjustment/Setting/ Operation data check | ||
12 | Used to check the DSPF misfeed position and the number of each misfeed. (If the number of misfeed is considerably great, it is judged that repair is required.) |
DSPF | Adjustment/Setting/ Operation data check | |
13 | Used to check the operating time of the process section (OPC drum, DV unit, toner cartridge). | Adjustment/Setting/ Operation data check | ||
14 | Used to display the use status of the toner cartridge. | Process | Adjustment/Setting/ Operation data check | |
18 | Used to display the user data delete history. | Adjustment/Setting/ Operation data check | ||
19 | Used to check the various scanner counters related to the network scanner. | Adjustment/Setting/ Operation data check | ||
40 | Used to display the error code list and the contents. | Error contents display | ||
42 | Used to check the JAM/trouble data | Adjustment/Setting/ Operation data check | ||
43 | JAM data details display | Adjustment/Setting/ Operation data check | ||
90 | Used to output the various setting data. | Adjustment/Setting/ Operation data check | ||
23 | 2 | Used to print the paper jam, misfeed, and the trouble history. (If the number of misfeed or the troubles is considerably great, it is judged that repair is required.) | Adjustment/Setting/ Operation data check | |
80 | Used to check the operation of paper feed and paper transport in the paper feed section and the paper transport section. Used to output the list of the operation status of the sensor and the detectors in the paper feed section and the paper transport section. | Paper feed, Paper transport | Operation test/check | |
24 | 1 | Used to clear the jam counter and the trouble counter. (After completion of maintenance, the counters are cleared.) | Data clear | |
2 | Used to clear the counter value (print quantity) in each paper feed section. | Data clear | ||
3 | Used to clear the counter value of the finisher, DSPF, and the scan (reading). | Data clear | ||
4 | Used to clear the drum counter value of the maintenance counter, the transfer, and the fusing web cleaning feed counter. (After completion of maintenance, the counters are cleared.) | Data clear | ||
5 | Used to clear the developer counter value. (After replacement of developer, the counter is cleared.) |
Data clear | ||
6 | Used to clear the copy counter value. | Data clear | ||
9 | Used to clear the printer mode print counter and the self print mode print counter. | Data clear | ||
10 | Used to clear the FAX counter value. (Only when the FAX is installed.) | Data clear | ||
12 | Used to clear the document filing counter. | Data clear | ||
15 | Clearing counters related to the network scanner | Data clear | ||
35 | Used to clear the toner cartridge use status data. | Data clear | ||
25 | 1 | Used to check the operation of the developing section. | Process (developing section) | Operation test/check |
2 | Used to initialize the toner density when replacing developer. (Automatic adjustment) | Process (Developing section) | Setting | |
4 | Used to display the operation data of the toner supply quantity. (Not used in the market.) | Process | Adjustment/Setting/ Operation data check | |
26 | 2 | Used to set the paper size of the tandem tray/large capacity paper feed tray (LCC). (When the paper size is changed, this simulation must be used to change the paper size on the software.) | Paper feed | Setting |
3 | Used to set the auditor specification mode.Sim.26-3 is described in the service manual for the convenience sake, but the coin vendors of the machines destined for overseas are not guaranteed. | Auditor | Setting | |
5 | Used to set the count mode of the total counter and the maintenance counter. (A3/11 x 17 size) | Setting | ||
6 | Used to set the specifications of each destination (paper, fixed magnification ratio, etc.) | Setting | ||
7 | Used to set the machine ID. | Setting |