Sharp MXM1100
Simulation mode. List of simulation codes 22 - 26
Main | Sub | Function (Purpose) | Section | Purpose |
---|---|---|---|---|
22 | 1 | Used to check the print count value of each section and each operation mode. (Used to check the maintenance timing.) | Adjustment, setting, operation data output and check | |
2 | Used to check the total number of misfeed and trouble. (If the total number of JAM is considerably great, it is judged that repair is required.) |
Adjustment/ Setting/ Operation data check | ||
3 | Used to check the misfeed position and the number of misfeed. * This data can be used to estimate the trouble position. |
Adjustment/ Setting/ Operation data check | ||
4 | Used to check the trouble (self diag) history. | Adjustment/ Setting/ Operation data check | ||
5 | Used to check the ROM version of each unit (section). | Other | ||
6 | Used to output the list of various setting and adjustment data (simulation, FAX soft switch, counter). | Adjustment/ Setting/ Operation data check | ||
8 | Used to check the counter value of the finisher, DSPF, and the scan (reading). | Adjustment/ Setting/ Operation data check | ||
9 | Used to check the use quantity (print quantity) of each paper feed section. | Paper feed, ADU, LCC | Adjustment/ Setting/ Operation data check | |
10 | Used to check the system configuration (option, internal hardware). | Adjustment/ Setting/ Operation data check | ||
11 | Used to check the use frequency (send/receive) of FAX. (Only when FAX is installed.) | FAX | Adjustment/ Setting/ Operation data check | |
12 | Used to check the DSPF misfeed position and the number of each misfeed. (If the number of misfeed is considerably great, it is judged that repair is required.) | DSPF | Adjustment/ Setting/ Operation data check | |
13 | Used to check the operating time of the process section (OPC drum, DV unit, toner bottle). | Adjustment/ Setting/ Operation data check | ||
19 | Used to check the various scanner counters related to the network scanner. | Adjustment/ Setting/ Operation data check | ||
90 | Used to output the various setting data. | Adjustment/ Setting/ Operation data check | ||
23 | 2 | Used to print the paper jam, misfeed, and the trouble history. (If the number of misfeed or the troubles is considerably great, it is judged that repair is required.) | Adjustment/ Setting/ Operation data check | |
80 | Used to print the paper transfer time list. | Paper feed, paper transport | Operation test/check | |
24 | 1 | Used to clear the jam counter and the trouble counter. (After completion of maintenance, the counters are cleared.) | Data clear | |
2 | Used to clear the counter value (print quantity) in each paper feed section. | Data clear | ||
3 | Used to clear the counter value of the finisher, DSPF, and the scan (reading). | Data clear | ||
4 | Used to clear the print counter value of the maintenance counter, the transfer, and the fusing web cleaning feed counter. (After completion of maintenance, the counters are cleared.) | Data clear | ||
5 | Used to clear the developer counter value. (After replacement of developer, the counter is cleared.) |
Data clear | ||
6 | Used to clear the copy counter value. | Data clear | ||
7 | Used to clear the OPC drum counter value. (After replacement of the OPC drum, the counter is cleared.) |
Data clear | ||
9 | Used to clear the printer mode print counter and the self print mode print counter. | Data clear | ||
10 | Used to clear the FAX counter value. (Only when the FAX is installed.) | Data clear | ||
15 | Clearing counters related to the network scanner | Data clear | ||
30 | Used to initialize the administrator password. | Data clear | ||
31 | Used to initialize the service mode password. | Data clear | ||
25 | 1 | Used to check the operation of the developing section. | Process (Developing section) | Operation test/check |
2 | Used to initialize the toner density when replacing developer. (Automatic adjustment) | Process (Developing section) | Setting | |
6 | Used to adjust the sensitivity of the developer adjustment sensor and the toner density sensor. (This setting is executed when developer together with the toner density sensor or developer together with the developing unit is replaced.) (Automatic adjustment) | Process (Developing section) | Setting | |
26 | 2 | Used to set the paper size of the tandem tray/large capacity paper feed tray (LCC). (When the paper size is changed, this simulation must be used to change the paper size on the software.) | Paper feed | Setting |
3 | Used to set the auditor specification mode. (Setting must be made according to the use conditions of the auditor.) |
Auditor | Setting | |
5 | Used to set the count mode of the total counter and the maintenance counter. (A3/11 x 17 size) | Setting | ||
6 | Used to set the specifications of each destination (paper, fixed magnification ratio, etc.) | Setting | ||
10 | Used to set the trial mode of the network scanner. | Setting | ||
18 | Used to set YES/NO of the toner save mode operation. (For Japan and UK versions.) | Setting | ||
30 | Used to set the CE mark support (Europe safety standards) operation mode. (Supporting slow start of the fusing heater lamp when driving it) | Setting | ||
35 | Used to set the display type of troubles in Sim. 22-4. When two or more same troubles occur continuously, the trouble history is displayed as one trouble or as two or more troubles occurring continuously. | Setting | ||
38 | Used to set whether printing is terminated or not when the developer life is reached or when the fuser web end. | Setting | ||
41 | Used to set YES/NO of the magnification ratio auto select function (AMS) in the center binding mode. | Setting | ||
49 | Used to set the postcard copy speed mode. | Setting | ||
50 | Used to set Enable/Disable of black/white reverse function. | Setting |