Main |
Sub |
Functions |
Section |
24 |
1 |
Used to clear the jam counter, and the trouble counter. (After completion of maintenance, clear the counters.) |
|
2 |
Used to clear the number of use (the number of prints) of each paper feed section. |
|
3 |
Used to clear the finisher, RSPF, and the scan (reading) unit counter. |
|
4 |
Used to clear the maintenance counter, the printer counters of the transport unit and the fusing unit. (After completion of maintenance, clear the counters.) |
|
5 |
Used to clear the developer counter. (After replacement of developer, clear the counter.) |
|
6 |
Used to clear the copy counter. |
|
7 |
Used to clear the OPC drum counter. (After replacement of the OPC drum, clear the counter.) |
|
9 |
Used clear the printer mode print counter and the self print mode print counter. |
|
10 |
Used to clear the FAX counter. (Only when FAX is installed) |
|
15 |
Used to clear the counters related to the scan mode and the image send. |
|
30 |
Used to initialize the administrator password. |
|
31 |
Used to initialize the service mode password. |
|
25 |
1 |
Used to check the operations of the developing section. |
Process (Developing section) |
2 |
Used to make the initial setting of toner density when replacing developer. (Automatic adjustment) |
Image process (Photoconductor/ Developing/Transfer/Cleaning) |
26 |
2 |
Used to set the paper weight type. |
Paper feed |
3 |
Used to set the specifications of the auditor. (Setting must be made according to the auditor use conditions.) |
Auditor |
6 |
Used to set the specifications (paper, fixed magnification ratio, etc.) of the destination. |
|
10 |
Used to set the trial mode of the network scanner. |
|
18 |
Used to set Disable/Enable of the toner save mode operation. (For the Japan and the UK versions.) |
|
30 |
Used to set the operation mode corresponding to the CE mark (Europe safety standards). (For slow start to drive the fusing heater lamp) |
|
35 |
Used to set the display mode of SIM 22-4 trouble history when a same trouble occurred repeatedly. There are two display modes: display as one trouble and display as several series of troubles. |
|
38 |
Used to set Continue/Stop of print when the maintenance life is reached. |
|
41 |
Used to set Enable/Disable of the magnification ratio automatic select function (AMS) in the center binding mode. |
|
49 |
Used to set the print speed of postcards mode. |
|
50 |
Used to set functions. |
|
52 |
Used to set whether non-printed paper (insertion paper, cover paper) is counted up or not. |
|
53 |
User auto color calibration (color balance adjustment) Inhibit/Allow setting (copy mode) |
|
54 |
User auto color calibration (color balance adjustment) Inhibit/Allow setting (printer mode) |
|
55 |
Used to set Enable/Disable of the automatic color calibration (automatic color balance adjustment) when replacing a consumable part. |
|
65 |
Used to set the staple process restriction. |
|
69 |
Used to set the operating conditions for toner near end. |
|
73 |
Used to adjust the image loss (shade delete amount) in the name card copy mode. |
|
74 |
Used to set the OSA trial mode. |
|
78 |
Used to set the password of the remote operation panel. |
|
27 |
1 |
Used to set non-detection of communication error (U7-00) with RIC. (FSS function) |
|
2 |
Used to set the sender's registration number and the HOST server telephone number. (FSS function) |
|
4 |
Used to set the initial call and toner order auto send. (FSS function) |
|
5 |
Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) (FSS function) |
Communication (RIC/MODEM) |
6 |
Used to set of the manual service call. (FSS function) |
|
7 |
Used to set of the enable, alert callout. (FSS function) |
|
9 |
Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) |
|
10 |
Used to clear the trouble prediction history information. (FSS function) |
|
11 |
Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) |
|
12 |
Used to check the high-density, half-tone process control and the automatic registration adjustment error history. (FSS Function) |
|
13 |
Used to check the history of paper transport time between sensors. (FSS function) |
|
14 |
Used to set the FSS function connection test mode. |
|
30 |
1 |
Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. |
|
2 |
Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. |
|
33 |
1 |
Used to check the operations of the card reader sensor and the control circuit. |
|
2 |
Used to delete the ID (IDM) information of Felica card. |
|
40 |
2 |
Manual paper feed tray paper width sensor adjustment. |
Paper feed |
7 |
Used to set the adjustment value of the manual paper feed tray paper width sensor. |
Paper feed |