Sharp MXC305W
Simulation mode. List of classic mode. Codes 46-48 - 63-8
| Sim No. | Content | Installation | Maintenance | Adjustment and Settings |
|---|---|---|---|---|
| 46-48 | Used to set the copy output resolution of copy mode | |||
| 46-51 | Used to adjust the gamma for the copy mode heavy paper mode and the image process mode | |||
| 46-52 | Used to set the gamma default for the copy mode heavy paper and the image process mode | 1-3 | ||
| 46-54 | Used to perform the engine halftone automatic density adjustment (dither) | 1-3 | ||
| 46-55 | Used to adjust the drop out color in the image send mode (monochrome manual text mode) | |||
| 46-58 | Used to set the copy mode pseudo resolution (smoothing process) | |||
| 46-60 | Used to adjust the sharpness in the copy/ scan mode | |||
| 46-61 | Used to adjust the area separation recognition level | |||
| 46-62 | Used to set the operating condition of the ACS the area separation the background image process and the auto exposure mode | |||
| 46-63 | Used to adjust the density in the copy low density section | |||
| 46-65 | Used to set the color correction table | |||
| 46-66 | Used to adjust the reproduction capability of watermarks in the copy/printer mode | |||
| 46-68 | Used to adjust the auto resolution judgement (For MX-xx70 series) | |||
| 46-74 | Copy color balance adjustment (Auto | 1-1 | 2-2 | 1-2 |
| adjustment)/printer color balance adjustment (Auto adjustment) | -5 | -3 | -3 | |
| 46-90 | Used to set the process operation of high compression PDF images | |||
| 46-91 | Used to adjust the reproduction capability of black text | |||
| 48-1 | Used to adjust the scan image magnification ratio (in the main scanning direction and the sub scanning direction) | 1-1 | ||
| 48-5 | Used to correct the scan image magnification ratio (in the sub scanning direction) | 1-1 | ||
| 48-6 | Used to adjust the rotation speed of each motor | |||
| 49-1 | Used to perform the firmware update | 4 | 5 | |
| 49 7 |
Pre-install data update | 4 | 5 | |
| 50-1 | Copy image position, image loss adjustment | 1-1 | ||
| 50-5 | Used to adjust the print lead edge image position | 1-1 | ||
| 50-6 | Used to adjust the copy image position and the image loss (SPF mode) | 1-1 | ||
| 50-10 | Used to adjust print image position | 1-2 | 2-1 | 1-1 |
| 50-12 | Used to perform the scan image off center position adjustment | 1-1 | ||
| 50-20 | Image registration adjustment (Main scanning direction) | 1-2 | ||
| 50-22 | Used to adjust the image registration (Main | 1-1 | 2-1 | 1-1 |
| scan direction, sub scan direction) | -2 | |||
| 50-23 | Used to set the registration for temperature adjustment | |||
| 50-24 | Used to display the detail data of SIM 44-2, 50-22 | |||
| 50-27 | Used to perform the image loss adjustment of scanned images in the FAX or image send mode | |||
| 51-1 | Used to adjust the ON/OFF timing of the secondary transport voltage | |||
| 51-2 | Used to adjust the contact pressure (deflection amount) on paper by the main unit and the SPF resist roller | |||
| 53-8 | Used to adjust the document lead edge reference and the SPF mode document scan position | 3 | ||
| 53-9 | SPF dirt detection setting | |||
| 53-10 | SPF dirt detection execution | |||
| 55-1 | Used to set the specification of the engine control operations (SOFT SW) | |||
| 55-2 | Used to set the specifications of the scanner control operation (SOFT SW) | |||
| 55-3 | Used to set the specifications of the controller operation (SOFT SW) | |||
| 55-10 | Used to set the special stamp text for Taiwan |
|||
| 56-1 | Used to transport data between HDD - MFP PWB SRAM/EEPROM | |||
| 56-2 | Used to backup the data in the EEPROM and HDD to the USB memory | |||
| 56-3 | Used to backup the document filing data to the USB memory | |||
| 56-4 | Used to backup the JOB log data to the USB memory | |||
| 56-5 | Used to import the SIM22-6 data to a USB memory in the text format | |||
| 56-6 | Used to output the JAM/trouble data | |||
| 56-7 | Used to export system log data to the USB memory | |||
| 56-8 | Used to perform ICC profile update | |||
| 56-15 | MFP EEPROM data restore | |||
| 56-99 | Used to export system log data to the USB memory | 3-4 | 1-5 | 9-4 |
| 60-1 | Used to check the memory operations (read/ write) of the SCU-MFP PWB | |||
| 61-1 | Used to check the LSU polygon motor rotation and laser detection | |||
| 61-3 | Used to set the laser power | |||
| 61-4 | Used to print the print image skew adjustment pattern | |||
| 61-14 | Used to set the laser power correction | 1-3 | ||
| 62-1 | Used to format the HDD | |||
| 62-3 | Used to check read/write of the STORAGE (all areas) | |||
| 62-4 | Used to check the format of the STORAGE (logical). | |||
| 62-7 | Used to print the STORAGE self diagnostics error log | |||
| 62-9 | Storage data clear | |||
| 62-12 | Used to set Enable/Disable of auto format in a STORAGE trouble |
|||
| 62-14 | Used to delete the document filing management data | |||
| 62-21 | Used to display the storage information in the STORAGE. | |||
| 63-1 | Used to display the shading correction result | |||
| 63-2 | Used to perform shading | 1-5 | 3 | |
| 63-3 | Used to perform scanner (CCD) color balance and gamma auto adjustment | 1-5 | 2-3 | 3 |
| 63-4 | Used to display the scanner test chart patch density | |||
| 63-5 | Used to perform the scanner (CCD) color balance and gamma default setting | 2-3 | 3 | |
| 63-7 | Used to register the service target of the copy mode auto color balance adjustment | 5 | ||
| 63-8 | Used to set the default of the service target of the copy mode auto color balance adjustment | 5 |