| Main |
Sub |
Functions |
Section |
| 50 |
1 |
Copy image position, image loss adjustment |
|
| 2 |
Used to adjust the copy image position and the image loss. (This simulation is a simplified version of SIM 50-1). |
|
| 5 |
Used to adjust the print lead edge image position. (PRINTER MODE) |
|
| 6 |
Used to adjust the copy image position and the image loss. (RSPF mode) |
RSPF |
| 7 |
Used to adjust the copy image position and the image loss (RSPF mode). (This simulation is a simplified version of SIM 50-6.) |
RSPF |
| 10 |
Used to adjust the print image magnification ratio and the off-center position. (The adjustment is made separately for each paper feed section.) |
|
| 12 |
Used to perform the scan image off-center position adjustment. (The adjustment is made separately for each scan mode.) |
|
| 27 |
Used to perform the image loss adjustment of scanned images in the FAX or image send mode. |
|
| 28 |
Used to automatically adjust the image loss, void area, image off-center, and image magnification ratio. |
|
| 51 |
2 |
Used to adjust the contact pressure (deflection amount) on paper by the main unit and the RSPF resist roller. (This adjustment is performed when there is a considerable variation in the print image position on the paper or when paper jams frequently occur.) |
|
| 53 |
8 |
Used to adjust the document lead edge reference and the RSPF mode document scan position. |
|
| 55 |
1 |
Used to set the specifications of the engine control operations. (SOFT SW) |
|
| 2 |
Used to set the specifications of the scanner control operation. (SOFT SW) |
|
| 3 |
Used to set the specifications of the controller operation. (SOFT SW) |
|
| 56 |
1 |
Used to transport data between HDD - MFP PWB SRAM/EEPROM. (Used to repair the PWB.) |
|
| 2 |
Used to backup the data in the EEPROM. SRAM, and HDD (including user authentication data and address data) to the USB memory. (Corresponding to the device cloning and the storage backup.) |
|
| 3 |
Used to backup the document filing data to the USB memory. |
|
| 4 |
Used to backup the JOB log data to the USB memory. |
|
| 60 |
1 |
Used to check the operations (read/write) of the MFP PWB memory. |
|
| 2 |
Used to set the MFP PWB on-board SDRAM. |
|
| 61 |
1 |
Used to check the LSU polygon motor rotation and laser detection. |
LSU |
| 3 |
Used to set the laser power |
|
| 4 |
Used to print the print image skew adjustment pattern. (LSU unit) |
|
| 62 |
1 |
Used to execute the hard disk format (except operation manual area). |
|
| 2 |
Used to check read/write of the hard disk (partial). |
|
| 3 |
Used to check read/write of the hard disk (all areas). |
|
| 6 |
Used to perform the self diagnostics of the hard disk. |
|
| 7 |
Used to print the hard disk self diagnostics error log. |
|
| 8 |
Used to format the hard disk. (Excluding the system area and the operation manual area) |
|
| 10 |
Used to delete the job log data. |
|
| 11 |
Used to delete the document filing data. |
|
| 12 |
Used to set Enable/Disable of auto format in a hard disk trouble. |
|
| 13 |
Used to format the hard disk. (only the operation manual area) |
|
| 63 |
1 |
Used to display the shading correction result. |
Scanner |
| 2 |
Used to perform shading. |
|
| 3 |
Used to perform scanner (CCD) color balance and gamma auto adjustment. |
Scanner |
| 4 |
Used to display the SIT chart patch density. |
|
| 5 |
Used to perform the scanner (CCD) color balance and gamma default setting. |
|
| 64 |
2 |
Test print. (Self print) |
|
| 4 |
Printer test print. (Self print) (256 gradations) (PCL) |
|
| 5 |
Printer test print. (Self print) (PCL) |
|
| 6 |
Printer test print. (Self print) (PS) |
|
| 7 |
Used to print the adjustment pattern of the test print. (Self print). (The adjustment pattern of SIM46-21 is printed.) |
|
| 65 |
1 |
Used to adjust the touch panel (LCD display section) detection coordinates. |
Operation panel section |
| 2 |
Used to display the touch panel (LCD display section) detection coordinates. |
|
| 5 |
Used to check the operation panel key input. |
|
| 67 |
17 |
Used to reset the printer controller. |
Printer |
| 24 |
Printer density and gradation adjustment (Auto adjustment) |
Printer |
| 25 |
Printer density and gradation adjustment (Manual adjustment) |
Printer |
| 30 |
(Not used) |
|
| 31 |
Used to clear the printer calibration value. |
Printer |
| 33 |
Used to change the gamma of the printer screen. (for PCL/PS) |
Printer |
| 34 |
Used to set the density correction in the printer high density section. (Support for the high density section tone gap) |
Printer |
| 36 |
Used to adjust the density in the low density section. |
Printer |
| 70 |
MFP PWB SRAM data clear |
MFP PWB |