Sharp MXB201D

1. Maintenance table

×: Check (Clean○ replace, or adjust according to necessity) ○: Clean ▲: Replace △ : Adjust ✩: Lubricate

Section	Parts	25K	50K	75K	100K	125K	Remark
Developing	Developer	▲	▲	▲	▲	▲
	DV blade	○	▲	○	▲	○
	DV side seal (F/R)	○	▲	○	▲	○
	DV doctor	×	×	×	×	×	White streaks are made on the image.
Process peripheral	Drum	▲	▲	▲	▲	▲

2. Maintenance display system

Toner	Life	8K
	Remaining quantity	NEAR EMPTY About 12.5%	EMPTY
	LED	ON	Flash
	Machine	Operation allowed	Stop
Developer	Life	25K
	LED	ON at 25K of the developer count.                            |
	Machine	Selection is available between Not Stop and Stop by Service Simulation (SIM 26-37) Setup. (If Stop is selected, the LED will flash and stop at 25K.) Default: Not Stop Clear: SIM 24-06
Maintenance	LED	Selection is available among 25K, 13K, 9K, 6K, 3K, and free (no lighting) with SIM 21-1. Default: 25K Clear: SIM 20-1
	Machine	Not stop.