Sharp MXB201D

1. Entering the simulation mode

To enter the serviceman simulation mode, press the keys as follows:

[#] key → [*] key → [Clear] key → [*] key

To cancel the simulation mode, press the [Clear All] key.

2. Key rule

[Numeric] key:

Entry of MAIN CODE/SUB CODE
Selection of an item
Setup of an adjustment value in case of simulations for adjustment

[◄] [►] key:

Selection of MAIN CODE/SUB CODE
Selection of an item

[ENTER]/[START] key:

Settlement <In case of simulations for print> [ENTER] key: Settlement (Without print) [START] key: Settlement / Print

[Clear] key:

(Interrupting operation check) Returns to the upper hierarchy. In case of simulation of operation check, terminates the operations.

[Clear All] key:

Exits from the simulation mode. For a simulation of adjustment, the display returns to the initial display (00-00).