Sharp MXB201
Simulation mode. List of simulations codes 46 - 66
Sim No. | Sub code | Operation |
---|---|---|
46 | 01 | Copy density adjustment (300dpi) |
02 | Copy density adjustment (600dpi) | |
12 | Density adjustment in the FAX mode (Collective adjustment) (When MX-FX12 is installed) | |
13 | Density adjustment in the FAX mode (Normal text) (When MX-FX12 is installed) | |
14 | Density adjustment in the FAX mode (Fine text) (When MX-FX12 is installed) | |
15 | Density adjustment in the FAX mode (Super fine) | |
(When MX-FX12 is installed) | ||
18 | Image contrast adjustment (300dpi) | |
19 | Exposure mode setup | |
20 | RSPF exposure correction | |
29 | Image contrast adjustment (600dpi) | |
30 | AE limit adjustment | |
31 | Image sharpness adjustment | |
32 | Copier color reproduction setup | |
39 | FAX mode sharpness adjustment (When MX-FX12 is installed) | |
48 | 01 | Front/rear (main scanning) direction and scan (sub scanning) direction magnification ratio adjustment |
05 | RSPF mode sub scan direction magnification ratio in copying | |
49 | 01 | MCU Download mode |
02 | ANB Download mode | |
50 | 01 | Lead edge image position |
06 | Copy lead edge position adjustment (RSPF) | |
10 | Center offset adjustment | |
12 | Document off-center adjustment | |
18 | Memory reverse position adjustment in duplex copy | |
19 | Duplex copy rear edge void adjustment (MX-B201D only) | |
27 | OC rear read edge position adjustment (REAR READ AREA) | |
51 | 02 | Resist quantity adjustment |
53 | 08 | RSPF scan position automatic adjustment |
61 | 03 | Polygon motor check (HSYNC output check) |
63 | 01 | Shading check |
02 | Black level automatic correction | |
12 | Light quantity stabilization wait time setting | |
13 | Light quantity stabilization band setting | |
64 | 01 | Self print |
66 | 01 | FAX soft SW setting (When MX-FX12 is installed) |
02 | FAX soft SW initializing (excluding the adjustment values) (When MX-FX12 is installed) | |
03 | FAX PWB memory check (When MX-FX12 is installed) | |
04 | Signal send mode (Max. value) (When MX-FX12 is installed) |
|
05 | Signal send mode (Soft SW set value) (When MX-FX12 is installed) |
|
10 | Image memory content clear (When MX-FX12 is installed) | |
13 | Dial test (When MX-FX12 is installed) | |
17 | DTMF signal send (Max. value) (When MX-FX12 is installed) |
|
18 | DTMF signal send (Soft SW set value) (When MX-FX12 is installed) |
|
21 | FAX information print (When MX-FX12 is installed) |