Sharp MX3631
Simulation mode. List of Classic mode. Codes 46-23 - 46-91
Sim No. |
Function |
Installation |
Maintenance |
Adjustment and Settings |
---|---|---|---|---|
46-23 |
Set the density correction of copy high density section (high density tone gap supported) |
|
|
|
46-24 |
Adjust the copy color balance (Auto adjustment) |
|
|
5 |
46-25 |
Adjust the copy color balance (Single color copy mode) |
|
|
|
46-26 |
Reset the single color mode color balance set value to the default |
|
|
|
46-27 |
Adjust the gamma/density of copy images, text and line image edges |
|
|
|
46-30 |
Adjust the resolution in the sub scanning direction in the copy mode |
|
|
|
46-32 |
Adjust the document background density reproducibility in the monochrome auto copy mode |
|
|
|
46-36 |
Adjust the colors in the two color copy mode |
|
|
|
46-37 |
Adjust the reproduction capability of color document in the monochrome mode |
|
|
|
46-38 |
Adjust the black component amount in the color copy mode |
|
|
|
46-39 |
Adjust the sharpness of FAX send images |
|
|
|
46-40 |
Adjust the FAX send image density (Collective adjustment of all the modes) |
|
|
|
46-41 |
Adjust the FAX send image density (Normal) |
|
|
|
46-42 |
Adjust the FAX send image density (Fine) |
|
|
|
46-43 |
Adjust the FAX send image density (Super fine) |
|
|
|
46-44 |
Adjust the FAX send image density (Ultra fine) |
|
|
|
46-45 |
Adjust the FAX send image density (600dpi) |
|
|
|
46-46 |
Adjust the FAX send image density (RGB |
|
|
|
46-47 |
Set the compression rate of copy and scan images (JPEG) |
|
|
|
46-48 |
Set the copy output resolution in the copy mode |
|
|
|
46-51 |
Adjust the gamma for heavy paper in copy mode and the image process mode |
|
|
|
46-52 |
Set the gamma default for heavy paper in copy mode and the image process mode |
|
|
1-3 |
46-54 |
Adjust the engine halftone auto density |
|
|
1-3 |
|
(Dither) |
|
|
5 |
46-55 |
Adjust the drop out color in the image send mode (Monochrome manual text mode) |
|
|
|
46-58 |
Set the pseudo resolution (smoothing process) in the copy mode |
|
|
|
46-60 |
Adjust the sharpness in the color auto copy mode |
|
|
|
46-61 |
Adjust the area separation recognition level |
|
|
|
46-62 |
Set the operating condition of the ACS, the area separation, the background image process and the auto exposure mode |
|
|
|
46-63 |
Adjust the density in the copy low density section |
|
|
|
46-65 |
Set the color correction table |
|
|
|
46-66 |
Adjust the reproduction capability of watermarks in the copy/printer mode |
|
|
|
46-68 |
Adjust the auto resolution judgement |
|
|
|
46-74 |
Adjust copy color balance (Auto) / printer |
1-1 |
2-2 |
1-2 |
|
color balance (Auto) |
1-5 |
2-3 |
1-3 |
46-90 |
Set the process operation of high compression PDF images |
|
|
|
46-91 |
Adjust the reproduction capability of black text |
|
|
|