Sharp MX2640N
Troubleshooting. Jam code list. Main unit 2
JAM code | JAM content | JAM detection method | Basic distance (A) [mm] |
JAM margin distance (B) [mm] | JAM detection distance (A+B) [mm] |
|
JAM detection start trigger | JAM judgment condition | |||||
CPFD2_S4 | CPFD2 remaining JAM (Desk lower stage feed paper) | Reception of the paper feed end command from DESK (The final roller position of DSEK) | CPFD2 OFF | 89.2 | 65.0 | 154.2 |
PPD1_S1 | PPD1 remaining JAM (Main cassette paper) | CPFD1 OFF | PPD1 OFF | 149.9 | 65.0 | 214.9 |
PPD1_S2 | PPD1 remaining JAM (Main cassette 2 feed paper) | CPFD1 OFF | PPD1 OFF | 149.9 | 65.0 | 214.9 |
PPD1_S3 | PPD1 remaining JAM (Desk upper stage feed paper) | CPFD1 OFF | PPD1 OFF | 149.9 | 65.0 | 214.9 |
PPD1_S4 | PPD1 remaining JAM (Desk lower stage feed paper) | CPFD1 OFF | PPD1 OFF | 149.9 | 65.0 | 214.9 |
PPD1_SM | PPD1 remaining JAM (Manual feed tray feed paper) | PPD1 ON | PPD1 OFF | Sub scan size -9 |
65.0 | Sub scan size -9 + 65 |
PPD1_SA | PPD1 remaining JAM (ADU refeed paper) | APPD2 OFF | PPD1 OFF | 131.1 | 65.0 | 196.1 |
PPD1_SL | PPD1 remaining JAM (LCC refeed paper) | Reception of the paper feed end command from LCC (LPFD OFF) | PPD1 OFF | 179.1 | 65.0 | 244.1 |
PPD2_S1 | PPD2 remaining JAM (Main cassette feed paper) | PPD1 OFF | PPD2 0FF | 62.9 | 65.0 | 127.9 |
PPD2_S2 | PPD2 remaining JAM (Main cassette 2 feed paper) | PPD1 OFF | PPD2 0FF | 62.9 | 65.0 | 127.9 |
PPD2_S3 | PPD2 remaining JAM (Desk upper stage feed paper) | PPD1 OFF | PPD2 0FF | 62.9 | 65.0 | 127.9 |
PPD2_S4 | PPD2 remaining JAM (Desk lower stage feed paper) | PPD1 OFF | PPD2 0FF | 62.9 | 65.0 | 127.9 |
PPD2_SM | PPD2 remaining JAM (Manual feed tray feed paper) | PPD1 OFF | PPD2 0FF | 61.4 | 65.0 | 126.4 |
PPD2_SA | PPD2 remaining JAM (ADU refeed paper) | PPD1 OFF | PPD2 0FF | 61.4 | 65.0 | 126.4 |
PPD2_SL | PPD2 remaining JAM (LCC feed paper) | PPD1 OFF | PPD2 0FF | 62.9 | 65.0 | 127.9 |
POD1 S | POD1 remaining JAM | PPD2 OFF | POD1 OFF | 297.6 | 65.0 | 362.6 |
POD2_S | POD2 remaining JAM (When left paper exit) | POD1 OFF | P0D2 0FF | 90.2 | 65.0 | 155.2 |
POD2 remaining JAM (When ADU reversing) | Reversing start | POD2 OFF after starting reversing | Sub scan size -60.6 |
65.0 | Sub scan size -60.6 + 65 |
|
POD3_S | POD3 remaining JAM | POD2 OFF after starting reversing | P0D3 0FF | 68.9 | 65.0 | 133.9 |
APPD1_S | APPD1 remaining JAM | POD2 OFF after starting reversing | APPD1 OFF | 111.0 | 65.0 | 176.0 |
APPD2 S | APPD2 remaining JAM | APPD1 OFF | APPD2 OFF | 228.8 | 65.0 | 293.8 |
PPD2_PRI | PPD2 JAM (Image preparation wait timeĀout) |
Transmission of the IMAGE_PREPARE command to ICU | Reception time-out ofthe END_IMAGE_PREPARE command from ICU (50 sec) | |||
CPFD2_ DESK |
CPFD2JAM (Desk communication abnormality detection) | Transmission of the preliminary paper feed request command to DESK | Reception time-out ofthe preliminary paper feed start command from DESK (30 sec) | |||
Reception ofthe preliminary paper feed start command from DESK | Reception time-out ofthe preliminary paper feed end command from DESK (30 sec) | |||||
Transmission of the paper feed request command to DESK |
Reception time-out ofthe paper feed start command from DESK (30 sec) | |||||
Reception ofthe paper feed start command from DESK | Reception time-out of the paper feed end command from DESK (30 sec) | |||||
PPD1_LCC | PPD1 JAM (LCC communication abnormality detection) |
Transmission of the preliminary paper feed request command to LCC | Reception time-out of the preliminary paper feed start command from LCC (30 sec) | |||
Reception ofthe preliminary paper feed start command from LCC | Reception time-out of the preliminary paper feed end command from LCC (30 sec) | |||||
Transmission ofthe paper feed request command to LCC |
Reception time-out of the paper feed start command from LCC (30 sec) | |||||
Reception ofthe paper feed start command from LCC | Reception time-out of the paper feed end command from LCC (30 sec) | |||||
PPD2_FIN | PPD2JAM (Finisher communication abnormality detection | Transmission of the paper attribute data command to FINISHER | Reception time-out of the paper interval data command fromFINISHER (30 sec |