Riso SF9250

Using Test Modes

Starting Normal Test Mode

Turn on the machine power while pressing both the top ◄ and bottom► keys. This starts test mode in test mode standby status.

Starting Factory-Setting Test Mode

To use factory-setting test mode, it is required to enter the key code. After normal test mode starts in standby status, use the numeric keypad to enter the 4-digit number (9874), and press the <Start> key. Then, the machine enters factory-setting test mode.

Working with Test Modes

To select a test mode, you can type the number of the desired test mode or select the test mode from the menu.

Selecting a Test Mode from the Menu

1. When the machine is in standby status, from the test mode menu, select a unit that contains the desired test item.
   • Use your finger to tap a unit name on the LCD. (The unit name is highlighted.)
   • The test mode sub-menu appears.
2. From the test mode sub-menu, select the test item to run.
   • Use your finger to tap a test item on the LCD. (The item is highlighted.)
3. Press the <Start> key to start the test mode.
4. Press the <Stop> or <Start> key to stop the test mode. The status is changed to the In Pause status or standby status.

* For test modes that change settings, pressing the <Start> key applies changes to the system and switches the status to standby. Pressing the <Stop> key discards changes and switches the status to standby.

Exiting a Test Mode

When the machine is in test mode standby status or the test mode In Pause status, pressing <Reset> key for one second or more terminates the test mode and enables the machine to enter normal mode.