Riso FR3910
Test Mode. 5. Sequential Operation Test
No | Details of Test Mode |
---|---|
101 | Ink supply operation Until the ink sensor gets ON, the main motor and the ink motor are held ON. Ink sensor ON → confidential op. → press application ´ 30 times → Stopped on A detection position. |
102 | Elevator operation Operation starts when the feed tray DOWN button is pressed. |
103 | P.-F. Tray Slide pulse motor operation (A3 only) Continuous sliding operation is performed after detecting P. -F. Tray Position Sensor. |
104 | Clamp open/close continuous operation Rotate Drum to Home position → clamp plate opened → one second halt → clamp plate closed → Rotate Drum to Home position → clamp plate opened |
107 | Ink-free printing operation (This applies only to 600dpi type.) Continuous printing is performed without inking. |
108 | Flat bed read pulse motor (image scanner) continuous operation (speed at 100%) Image Scanner home position sensor position (2 seconds halt) → rightward shift → ADF shading sensor position (2 sec. halt) → rightward shift → ADF read-in position (2 sec. halt) → leftward shift → Image Scanner home position sensor position (2 sec. halt) → rightward shift → ..... |
109 | Machine aging operation Drum rotation at 3000 times → Stop at A detection |
111 | Thermal pressure motor operation When TPH home position SW is ON: |
112 | Cutter motor one-cut operation |
113 | FB type ADF original feed operation (Image scanner does not operate.) ADF original det. sensor ON → ADF original setting → ADF read-in operation → ADF original det. sensor ON → ADF original setting ... |