Ricoh SPC360SNw
Service Program Mode. TEST PATTERN PRINTING
After changing an SP value for registration or image adjustment, print a test pattern to check the adjustment result.
- Enter the SP mode.
- Select SP2-109-001 (Test Printing: pattern Selection).
- Select the number for a test pattern that you want to print.
Printer model: Press [Up] [Down] key to select the test pattern, and then press [OK] key.
MF model: Press the test pattern key, and then press [OK] key. - Enter SP2-109-002 (1 Sheet Printing) or SP2-109-003 (Continue Printing), and then press “Execute” to print test pattern.
When 1 sheet printing, you can select the print side with SP2-109-004 (Print Side Select). - Exit SP mode.
No. | Pattern | No. | Pattern |
---|---|---|---|
0 | None | 9 | Arg.Grid20mm |
1 | Vert. (1dot) | 10 | Indep.(1dot) |
2 | Hori. (1dot) | 11 | Indep.(2dot) |
3 | Vert. (2dot) | 12 | IIndep.(4dot) |
4 | Hori. (2dot) | 13 | Full |
5 | Grid Vert. | 14 | Band |
6 | Grid Hori. | 15 | Trim Area |
7 | Grid 20mm | 16 | White (MF model only) |
8 | Arg. Grid | 17 | SFBC Pattern (MF model only) |