Ricoh SPC261DNw
Maintenance. Replaceable Items
User Replaceable Items
Item | Yield | Note |
---|---|---|
Waste Toner Bottle | Approx. 25 k prints/ bottle (See condition 4) | Image Coverage Ratio: 5%, BK:CMY=5:5 |
AIO BK (1.8k) | Approx. 2.0 k prints/cartridge | For SP C260DNw/SP C260SFNw |
AIO CMY (1.4k) | Approx. 1.6 k prints/cartridge | For SP C260DNw/SP C260SFNw *Except for NA |
AIO BK (2.0k) | Approx. 2.3 k prints/cartridge | For SP C260DNw/SP C260SFNw (NA only) |
AIO CMY (2.0k) | Approx. 2.3 k prints/cartridge | For SP C260DNw/SP C260SFNw (NA only) |
AIO BK (3.6k) | Approx. 4.5 k prints/cartridge | For SP C262DNw/C262SFNw |
AIO CMY (3.4k) | Approx. 4.0 k prints/cartridge | For SP C262DNw/C262SFNw |
AIO BK (5k) | Approx. 6.5 k prints/cartridge | For SP C262DNw/C262SFNw |
AIO CMY (5k) | Approx. 6.0 k prints/cartridge | For SP C262DNw/C262SFNw |
Condition:
- The condition is standard temperature and humidity.
- These yield values may change depending on the circumstances and printing conditions.
- The Waste Toner Bottle's yield is measured when the printer is used 50% for color and 50% for black-andwhite
- Waste Toner Bottle yield was measured for 3P/J when the printer is used 50% for color and 50% for blackand- white.
Yield items and Service Maintenance
The machine default setting will show the messages “Replace Soon” at the near end condition and “Replace Now” at the end condition for yield parts. However, you can select the preferred machine action at near end and end for yield parts using SP mode “PM Parts Rep Notice” as shown in the following table. There are 4 settings (0 to 3):
Sets whether to display the PM parts replacement notice and whether to stop the engine.
0 | At near end: No Notice / Not Stopped |
At life end: Notice “Replace Now” / Not Stopped | |
1 | At near end: No Notice / Not Stopped |
At life end: No Notice / Not Stopped | |
2 (default) | At near end: Notice / Not Stopped |
At life end: Notice “Replace Now” / Not Stopped | |
3 | At near end: Notice “Replace Soon” / Not Stopped |
At life end: Notice “Replace Now” / Stopped |
Item | Yield |
---|---|
Image Transfer Unit | 90 K |
Fusing Unit | 90 K |
Transfer Roller | 90 K |
DF Separation Pad (for MF Models) | 35 K |