Ricoh Pro C700EX
Maintenance. PM Tables 5
3000-Sheet Finisher B830
350K | 700K | 1050K | Note | |
---|---|---|---|---|
FINISHER | ||||
Driver rollers | I | I | I | Alcohol |
Idle rollers | I | I | I | Alcohol |
Discharge brush | I | I | I | Alcohol |
Shaft Bearings | I | I | I | Lubricate with silicone oil if noisy. |
Sensors | I | I | I | Blower brush. |
Jogger fences | I | I | I | Make sure that the screws are tight. |
Staple waste hopper | C | C | C | Empty staple waste. |
Punch B831
300K | 450K | 600K | EM | Note | |
---|---|---|---|---|---|
Punch Waste Hopper | I | I | I | Remove and empty |
Cover Interposer Tray B835
The PM interval is for the number of sheets that have been fed.
60 K | As Needed | Note | |
---|---|---|---|
Drive rollers | C | Dry cloth | |
Idle rollers | C | Dry cloth | |
Feed belt | R | ||
Separation roller | R | ||
Pick-up roller | R | ||
Sensors | C | Blower brush. | |
Drive gears | I | Lubricate with a very small amount of G501. |