Ricoh MPC407SPF
Troubleshooting. Process Control Self-Check Result
Displayed number shows results of each color sensor check. 00000000 = YYCCMMKK
SP3-012-001 to -010 (Process Control Execute Result)
No. | Result | Description | Possible Causes/Action |
---|---|---|---|
11 | Successfully completed | Process control self-check successfully completed. | Check the Vsg adjustment. See the "Vsg Adjustment Result" following this table. |
41 | Vt error | Vt maximum or minimum error is detected. |
Vt maximum error and an image is O.K:
|
53 | ID sensor coefficient (K5) detection error | Not enough data can be sampled. |
|
54 | ID sensor coefficient (K5) maximum/ minimum error | When the K5 is more than the value of SP3-362-003 or less than the value of SP3-362-004, the error 54 is displayed. |
|
55 | Gamma error: Maximum | Gamma is out of range. 5.0 < Gamma |
|
56 |
Gamma error: Minimum |
Gamma is out of range. |
|
57 | Vk error: Maximum | Vk is out of range. 150 < Vk |
|
58 | Vk error: Minimum | Vk is out of range. Vk < –150 |
|
59 | Sampling data error during gamma correction | Not enough data can be sampled during the gamma correction. |
|
99 | Unexpected error | Process control fails. |
|