Ricoh MPC2051
Troubleshooting. Jam Codes 2
Mainframe
SP7-504 shows how many jams occurred at each location.
| Jam Code SP | Display | Description | LCD Display |
|---|---|---|---|
| 7504 29 | R-tray Paper Exit: ON | Paper exit sensor of the side tray does not detect paper. | C |
| 7504 51 | Vertical Transport Sensor1 |
Vertical transport sensor 1 does not turn off. | A1, A2 |
| 7504 52 | Vertical Transport Sensor2 |
Vertical transport sensor 2 does not turn off. | Y |
| 7504 53 | Vertical Transport Sensor3 |
Vertical transport sensor 3 does not turn off. | Y |
| 7504 57 | Registration Sensor | Registration sensor does not turn off. | B |
| 7504 58 | Fusing Entrance Sensor | Fusing entrance sensor does not turn off. | C |
| 7504 59 | Fusing Exit Sensor | Fusing exit sensor does not turn off. | C |
| 7504 60 | Exit Sensor | Paper exit sensor does not turn off. | C |
| 7504 64 | Inverter Sensor | Inverter sensor does not turn off. | C |
| 7504 65 | Duplex Exit Sensor | Duplex exit sensor does not turn off. | Z |
| 7504 67 | Duplex Entrance Sensor | Duplex entrance sensor does not turn off. | Z |
| 7504 68 | 1-Bin Exit: ON | 1-bin tray exit sensor does not turn off. | R |
| 7504 69 | R-tray Paper Exit Sensor | Paper exit sensor of the side tray does not turn off. | W |
| 7504 230 | FIN:Paper Exit Error | The machine does not get paper exit data from the internal finisher. | R1, R2 |
| 7504 231 | FIN:Command Error | The machine gets a command error from the internal finisher. | R1, R2 |
| 7504 240 | Fin. Entrance: ON | Entrance sensor of the internal finisher does not detect paper. | C, R1, R2 |
| 7504 241 | Fin. Entrance Sensor | Entrance sensor of the internal finisher does not turn off. |
R1, R2 |
| 7504 242 | Feed-Out Belt Motor | The mainframe detects the lock signal from the paper transport motor of the internal finisher. | R1, R2 |
| 7504 243 | Stapler Motor | The mainframe detects the lock signal from the staple motor of the internal finisher. | R1, R2 |
| 7504 244 | Jogger Motor | The mainframe detects the lock signal from the front or rear jogger motor of the internal finisher. | R1, R2 |
| 7504 245 | Pick-Up Roller Lift Motor | The mainframe detects the lock signal from the pick-up roller contact motor of the internal finisher. | R1, R2 |
| 7504 246 | Stapler Unit Drive Motor | The mainframe detects the lock signal from the stapler unit movement motor of the punch unit. | R1, R2 |
| 7504 247 | Output Tray Motor | The mainframe detects the lock signal from the feed motor of the internal finisher. | R1, R2 |
| 7504 248 | Belt Lift Solenoid | The mainframe detects the belt lift solenoid error from the internal finisher. |
R1, R2 |
| 7504 249 | Finisher Fan | The mainframe detects the finisher fan error from the internal finisher. |
R1, R2 |
| 7504 250 | Punch Motor | The mainframe detects the lock signal from the punch motor. | R1, R2 |
| 7504 251 | Finisher Proof Exit | The mainframe detects the lock signal from the registration motor of the punch unit. | R1, R2 |
| 7504 252 | FIN:Stapler Position Error | The stapler unit stays on the jogger end fence so that stapling is disabled. | R1, R2 |
| 7504 253 | FINJob Data Error | Unexpected job data is sent to the internal finisher from the mainframe. | R1, R2 |
Note:
• The jam location display depends on where a paper jam is detected at power-on.
ARDF (Original Jam)
| Jam Code SP | Display | Description | LCD Display |
|---|---|---|---|
| 7505 1 | At Power On | Original is stack at power-on. | P |
| 7505 3 | Skew Correction: ON | Skew correction sensor does not detect paper. | P |
| 7505 4 | Registration: ON | Registration sensor does not detect paper. | P |
| 7505 5 | Paper Exit: ON | Exit Sensor does not detect paper. | P |
| 7505 53 | Skew Correction: OFF | Skew correction sensor does not turn off. | P |
| 7505 54 | Registration: OFF | Registration sensor does not turn off. | P |
| 7505 55 | Paper Exit: OFF | Exit Sensor does not turn off. | P |