Ricoh MPC2010
Troubleshooting. Electrical Component Defects 3
Blown Fuse Conditions
Power Supply Unit
Fuse | Rating | Symptom when turning on the main switch | |
---|---|---|---|
120V | 220V - 240V | ||
FU101 | 15A/125V | 8A/250V | The i-controller works, but SC547 is issued. (5 V power to the fusing unit is not supplied.) |
FU102 | 10A/125V | 5A/250V | No response. (5V power to the PSU is not supplied.) |
FU103 | 2A/250V | 2A/250V | AC power to the scanner heater and tray heater is not supplied. |
FU4 | 5A/250V | 5A/250V | 5V power to the i-controller and BCU is not supplied. |
FU5 | 5A/250V | 5A/250V | 5V power to the BCU is not supplied. |
FU6 | 5A/250V | 5A/250V | 5VS power to the i-controller is not supplied. |
FU7 | 10A/125V | 10A/250V | 24VS power to the BCU is not supplied. |
FU8 | 10A/125V | 10A/250V | 24VS power to the BCU is not supplied. |
FU9 | 10A/125V | 10A/250V | 24V power to the DRB and i-controller is not supplied. |
Caution
- For continued protection against risk of fire, replace only with same type and rating of fuse.