Ricoh MP5000B

Note

• Always print a test pattern to confirm correct operation of the machine.

1. Enter the SP mode and select SP2-109 (Printing) or SP4-417 (IPU).
2. Enter the number for the test pattern that you want to print and press . (See the tables below.)
3. When you are prompted to confirm your selection, press "OK". This selects the test pattern for printing.
4. Press Copy Window to open the copy window and then select the settings for the test print (paper size, etc.)
5. Press Start twice. (Ignore the "Place Original" messages) to start the test print.
6. Press SP Mode (highlighted) to return to the SP mode display.

Test Pattern Table (SP2-109-001: Printing test pattern)

No.	Test Pattern	No.	Test Pattern
0	None	13	Independent Pattern (4-dot)
1	Vertical Line (1-dot)	14	Trimming Area
2	Vertical Line (2-dot)	15	Hound's Tooth Check (Vertical)
3	Horizontal Line (1-dot)	16	Hound's Tooth Check (Horizontal)
4	Horizontal Line (2-dot)	17	Black Band (Horizontal)
5	Grid Vertical Line	18	Black Band (Vertical)
6	Grid Horizontal Line	19	Checker Flag Pattern
7	Grid Pattern Small	20	Grayscale (Vertical Margin)
8	Grid Pattern Large	21	Grayscale (Horizontal Margin)
9	Argyle Pattern Small	22	Two Beam Density Pattern
10	Argyle Pattern Large	23	Full Dot Pattern
11	Independent Pattern (1-dot)	24	All White Pattern
12	Independent Pattern (2-dot)

Test Pattern Table: SP4-417-001 IPU Test Patterns

No.	Test Pattern	No.	Test Pattern
0	Scanned image	13	Grid pattern CMYK
1	Gradation main scan A	14	Color patch CMYK
2	Gradation main scan B	15	Gray pattern (1)
3	Gradation main scan C	16	Gray pattern (2)
4	Gradation main scan D	17	Gray Pattern (3)
5	Gradation sub scan (1)	18	Shading pattern
6	Grid pattern	19	Thin line pattern
7	Slant grid pattern	20	Scanned + Grid pattern
8	Gradation RGBCMYK	21	Scanned + Gray scale
9	UCR pattern	22	Scanned + Color patch
10	Color patch 16 (1)	23	Scanned + Slant Grid C
11	Color patch 16 (2)	24	Scanned + Slant Grid D
12	Color patch 64